Tools for the job
On site safety
Measuring
Proper movement of materials
Proper cuts
100
Is triangular in shape and is used to make 90' markings and true cuts.
What is a speed square
100
is often abbreviated as PPE
What is personal protective equipment.
100
two marks indicate ( " ) this when measuring
What is an inch of measurement
100
when lifting never lift with this part of your body.
What is your back.
100
when using a plug in saw always inspect
What is the electrical cord and plug for fraying
200
using string and a "snapping" techniques will create a clear line to cut along.
What is a chalk line
200
these type of boots allow the best protection for your feet on a construction job.
What is steel toed boots
200
as common tape measure only goes up to this many feet.
What is 25 feet.
200
This moving equipment uses two wheels a long steel frame with handle and a platform to stack objects to move.
What is a dolley or hand truck
300
using a larger motor that is fastened to a frame and a 10 " blade this tool will make large cuts over long distances.
What is as table saw
300
You should never be on this part of a step ladder.
What is the top step or top of the ladder
300
when buying screws and nails they are measured by this unit.
What is pounds
300
When carrying and moving boxes by hand make sure to keep your head in this position
What is upright position
300
approximate thickness of a circular or framing saw blade.
What is 1/8th of an inche
400
mixing, transporting, come in 4, 5, 6 cubic foot capacities.
What is a wheelbarrow
400
For and extension ladder this many feet should extend above the roof line.
What is 3 feet
400
a sheet of drywall and plywood is this size (width and height).
What is 4 feet by 8 feet
400
when moving objects across a parking lot or warehouse area make sure to do this before you start toward your destination
What is survey the area first.
400
using a handsaw requires these type of strokes to make fast and accurate cuts.
What is short and rapid strokes.
500
Creates electricity from a gasoline engine to run power tools when there is no electrical hook-ups.
What is a gas powered generator
500
When working this many feet above ground level a railing and toe board are required.
What is 6 feet above ground level.
500
When estimating a floor, wall, or ceiling job we would use this measurement.
What is square footage.
500
always be prepared to do this when moving materials across open warehouse or outdoor areas.
What is stop quickly
500
when using a modern power tool they must be either this or that.
What is insulated or grounded.
M
e
n
u