General Safety
Safety Inspections
Fire Safety
Vehicle Safety
Chemical Safety
100

What does AIPP Stand for?

Accident and Illness Prevention Program

100

Name three things that should be inspected on a fire extinguisher.

what is: the gauge is in the green, the pin is in place and sealed, and it is not blocked

100

The P in PASS

What is: Pull PIN

100

What is the first thing you do when driving your equipment?

Perform a pre-trip inspection.

100

An SDS must be kept on every one of these in a workplace

What is chemcial

200

What you should do whenever you see an unsafe condition in the workplace?

What is REPORT IT?

200

Name one thing that should be inspected on a eye wash station

Proper Flow, not blocked, clean, drain is clear.

200

Where is the Emergency Evacuation rally point?

Outside near the ____________________.

200

What is the area to the back or side of a vehicle where the driver cannot see?

Blind Spot

200

The D is SDS

What is DATA?

300

Where do you get your safety information at the Turnpike?

What is the Safety Corner, Safety Committee, Supervisor/Foreman or Safety Advisor?

300

What are three things that should be checked during a ladder inspection?

Rungs are not damaged, Feet are not missing or damaged, Free of oil and grease, Capacity stickers and inspection stickers are intact.

300

The first S in PASS

What is SQUEEZE?

300

How do you safely enter and exit a vehicle?

With three points of contact.

Facing the vehicle. 

300

What is a corrosive chemical? 

Acid or caustic

400

When lifting a heavy object, the back should be kept _____________________ and the knees should be _________________________.

What is STRAIGHT AND BENT

400

All chemicals in your area should be.

Properly labeled and have a SDS

400

Name the three components required to support a fire

Oxygen, Fuel, Heat.

400

True or False: Mirrors should not be adjusted.

False. Mirrors should be adjusted to fit the driver so they can see obstacles. 

400

Where can you find all SDS for chemicals we use?

SDS Binder located under the TV in the common room

500

What is ergonomics?

Ergonomics is the process of designing or arranging workplaces, products and systems so that they fit the people who use them to prevent MSD's

500

Electrical panels require how big of an area to be clear in front of them?

3ft

500

What do the letters in PASS Stand for?

Pull Pin, Aim, Squeeze, Sweep

500

What is the #1 cause of workplace injuries in the USA?

Vehicle accidents

500

What is the term for a cancer-causing chemical?

Carcinogen

M
e
n
u