General Safety
HAZ ID/PFLHA
Job Safety Analysis
Emergency Action Plan
Lockout/Tagout
100

The first and most important, fundamental level of preventing falls due to slips and trips.

Good Housekeeping. 

100

Must be signed off by a supervisor before being completed. 

Personal Field Level Hazard Assessment (PFLHA)

100

A Job Safety Analysis is a technique that focuses on job tasks as a way to identify _______ before they occur.

 Hazards

100

In the event of an emergency, how many whistles will be employed?

5

100

A padlock is placed on a disconnect switch, circuit breaker, valve handle or other energy-isolating mechanism that is in the “off” or “closed” position.

Lock-Out

200

All walkways must allow for ____ ft of safe separation between mobile equipment/vehicles and pedestrians

30

200

A _____ is a tool to assist in ensuring adequate CONTROLS are implemented when HAZARDS are identified during non-routine tasks and when routine tasks have been temporarily modified. 

Personal Field Level Hazard Assessment (PFLHA)

200

The purpose of this Job Safety Analysis Policy is to identify, control and/or _____ job hazards as early as possible.

Eliminate

200

The _____ and _______ are responsible for communicating the emergency on all radio channels being utilized.

 Managers and Supervisors

200

An _____ employee does not actually perform the service and maintenance. However, they may operate the machinery/equipment or work in the same area.

Affected

300

Handrails must be capable of supporting how many pounds of force?

200 lbs. 

300

An opportunity to correct conditions or situations in the moment before an event takes place.

Hazard Identification Card

300

During this review the employees are encouraged to make suggestions for changes or updates to their JSA’s. What is this review called?

Performance Duet

300

The standard procedure in case of a major plant fire for employees is to ______ equipment and immediately ________. 

shut off, notify the Supervisor.

300

Employees will be deemed ____ to perform lock out only after proving competency in this standard and lock out trainings.

 Qualified

400

The process of removing the hazard from the workplace.

Elimination.

400

A ______ is something that can lead to injury or damage.

Hazard

400

All operational jobs at CVD will have a Job Safety Analysis and be completed by a _____ or ______.  

Supervisor or Manager.

400

Entry to the Mill plant site is on the ____ side of the railroad tracks.

South

400

All employees must have their lock out _____ by a site Supervisor prior to commencing work.

Verified

500

Fine particles that present an explosion hazard when suspended in air in certain conditions.

Combustible Dust.

500

Describe a class B Risk Ranking. 

Indicates potential for injury or illness, resulting in temporary disability, property damage that is disruptive to the operation but not extensive or environmental impacts that pose a serious risk. CRITICAL RISK

500

If there is an ______ or ______, the JSA for that machine center/process will be reviewed.

Accident or Near Miss.

500

In case of flooding, go to ___ ground.

High

500

Persons actually performing service and maintenance, or those in charge of these functions, are considered _____ employees.

Authorized

M
e
n
u