Wild Card
Color Pin Terminal 6
Green
Connector Pin Terminal 3
White / Green
XCAM upgrading firmware
Blinking Yellow 3 per second
24v Power for heat
AIP
Account information Portal
These pins must be shorted out in an X-Cam connector.
4 and 7
XCAM booting up
Solid Yellow
W wire
White - 1st Stage heat relay
Connector pin terminal 2
Orange
This is the CMS desired response time
20 seconds
2 wire smoke detectors are required to have this at the end
2K EOLR
Motion sensor Range
49' X 49' with a standard sensitivity of 35'
This kills power on the smoke detector circuit to resist smoke detectors after they are tripped
4142 Trigger Cable
A command that enables multiple rules or functions at a single time
Scene
This is the time that the CMS must take the first action
45 seconds
O wire
Orange - Change over valve for cooling
The temperature of the Smoke Detector heat rating
135 degrees
XCAM temperature range
32-122 degrees
XCAM is ready to be paired
Blinking blue 1 time per second
Output of Siren
85dba at 10ft
IVS
Installation verification scorecard
A required period that prevents a report to the central station if an alarm was triggered innocently.
Alarm transmission delay
This is the minimum speed for 24/7 recording
2MBS
In the US, a home is burglarized every
14.4 seconds
hard wired smoke detectors must always be wired with a
parallel circuit