General
Which area of the CE Code provides the reason the CE Code exists?
Object
Section 0
Alphabetically arranged
Index
When shall the application for inspection be filed?
When the permit is obtained (before work begins)
Rule # 2-006
What is the current carrying capacity of a conductor?
Ampacity
Section 0
Tables __ & __ are used to determine the ampacity of aluminum conductors.
Tables 3 & 4 - aluminum
Rule 4-004 (2)
Where is the General Arrangement found?
Preface
Organized into "sections"
Table of Contents
The manufactured date shall be marked on electrical equipment. True or False?
False
Rule 2-100
Insulated aluminum conductors cannot be smaller than ___?
No. 12 AWG
The ampacity of conductors with different temperature ratings installed in the raceway shall be determined on the conductor having the ___ rating.
Lowest
4-004 (14)
What are the general sections of the CE Code?
Sections 0-16 & 26
Notes on rules
Appendix B
Branch circuits in dwelling units shall not exceed ___V to ground? (ignore any exceptions)
120V
Rule 2-110
The white wire in a 2-wire circuit that carries the same amount of current as the live conductor is called ___?
Identified
The maximum ampacity of neutral supported cable shall be as specified in ___?
Table 36A & 36B
What are the Supplementary Sections of the CE Code?
Sections 18-86 (except 26)
CSA configurations for locking receptacles
Diagram 2
What marking on conductors or cables is required when exposed to direct rays of sun?
Sunlight resistant
Rule # 2-136
When the termination temperature is unknown, what rule tells us the default temp. to use for Tables 1, 2, 3 and 4?
Rule # 4-006
The neutral conductor is counted as a current-carrying conductor. True or False?
False
Rule 4-004 (3)
Where do you find the metric designator (size) for a 3/4" conduit?
Preface - Page 35
Conduit, tubing and fitting sizes
Table for CSA Enclosures
Table 65
What is the minimum CSA enclosure rating for electrical equipment that is installed outdoors?
Type 3R
Rule # 2-400 (c)
The ampacity of portable power cables shall be as specified in ___?
Table 12A
Rule 4-034
When applying the correction factors from Table 5A, what temperature rating is used?
The conductor insulation rating (marked on the conductor - ie. RW90)