102.3 Blend

a

1

Blend method means, both _______ and __________ are available at the needle separately or together.

galvanic and thermolysis 

2

Explain the main advantage of using high frequency current in the blend method 

High-frequency current is a fast acting current 

3

During the blend method, the nerve endings are coagulated by the action of ______ 

high-frequency 

4

High-frequency current which primarily determines 

the length of time to apply blended currents 

5

During blend treatments, your milliampere meter should indicate a reading equal to 

units of lye divided by seconds 

b

1

The chemical action of sodium hydroxide on the tissue is sped up by_______.

heat     highfrequency 

2

The production of lye is enhanced by high-frequency current because high-frequency current: 

coagulates (heat) the tissue around the needle so that the lye solution can diffuse 

3

If applied at intensities below those which cause moisture to boil away, high-frequency heating will ________ tissue 

coagulate the tissue 

4

Due to the heated action of high - frequency, the blend requires _________ amount of galvanic lye 

1/4

5

As the evacuated follicle contracts around the fluid, it exposes its entire target area from the papilla to the hair germ cells to the affects of 

Lye (sodium hydroxide)

c

1

area of the body that is more susceptible to pitting and depressions 

the face 

2

the main factor limiting the operators speed in body work is 

the clients pain tolerance 

3

Working on the body the electrologist can 

can use a higher amount of HF current than working on the face 

4

Successes of the blend in all types of problem treatments is due to its 

easy adjustment to different intensity combinations 

5

The blend effects permanent hair removal by 

radio frequency RF (HF) and galvanic current 

d

1

the working point of manual technique is usually found between the duration of 

3 - 20 seconds 

2

what is blend (settings) 

it's a use of galvanic current (DC) and low-intensity high-frequency currents for hair removal

3

Name an important factor in the use of the blend is 

correctly proportioned relationship between currents 

Settings 

4

when galvanic current meets with body salts and tissues moisture, it creates 

lye aka; sodium hydroxide 

5

what is the lead in starting the currents 

the footswitch 

e

1

the blend requires the use of both poles to 

complete the circuits 

negative-needle    /   positive-patron 

2

when removing very deep terminal hairs with a blend method you will approximately need 

80 units of lye