Enter Title

MATERIAL

100

THIS MATERIAL IS RED IN COLOR AND USED OFTEN.

WHAT IS '44

200

THIS MATERIAL DOES NOT EXPIRE

WHAT IS MESH

300

THIS MATERIAL CAN ONLY BE HANDLED WITH WHITE GLOVES.

WHAT IS HONDA

400

A 66G KIT IS CUT FROM THIS MATERIAL:

WHAT IS 42

500

THIS KIT IS THE ONLY KIT AN OPERATOR CUTS WITHOUT THE USE OF A MACHINE:

WHAT IS 25F 

FYI

100

WHAT IS FOD?

FOREIGN OBJECT DEBRIS/DAMAGE

200

THIS FORM IS TO BE COMPLETED WHEN THERE ARE ISSUES WITHIN THE KIT/MATERIAL.

WHAT IS A QUARNATINE CONTROL FORM.

                         "QCF" 

300

CCA STANDS FOR:

WHAT IS CONTROLLED CONTAMINATION AREA 

400

A CALIBRATION CHECK PERFORMED ON A MACHINE SHOULD BE COMPLETED:

WHAT IS DAILY 

500

THERE ARE TWO ELEMENTS TO TRACEABILITY THAT THE AEROSPACE INDUSTRY HOLDS MANDATORY STANDARDS ON. WHAT ARE THOSE ELEMENTS?

MATERIAL-MATERIAL CAN BE TRACKED FROM THE START OF THE SUPPLY CHAIN ALL THE WAY TO THE AIRCRAFT.

OPERATOR-EVERY ACTION PERFORMED CAN BE TRACED BACK TO THE OPERATOR.

TRUE/FALSE

100

 KITS  AND MATERIAL MUST ALWAYS BE STORED IN SUCH A WAY TO PREVENT DAMAGE AND CONTAMINATION.

TRUE

200

SANITIZER CAN BE USED IN THE CLEAN ROOM AS LONG AS YOU ALLOW TIME FOR IT TO DRY BEFORE HANDLING MATERIAL. 

FALSE. NO OILS, LOTIONS, ETC. CAN BE USED IN THE CLEAN ROOM. 

300

IT IS OK TO MAKE CHANGES TO WORK INSTRUCTIONS AS LONG AS YOU NOTIFY THE TEAM LEADER. 

FALSE, CHANGES CAN ONLY BE MADE BY AUTHORISED PERSONNEL AND IN A CONTROLLED WAY. 

400

A SMALL SLITHER OF MATERIAL ATTACHED TO ONE OF OUR CUT SHAPES IS NOT FOD. 

FALSE 

500

VELOCITY HOLDS THE AS9102 CERTIFICATION.

FALSE; THIS IS NOT A CERTIFIABLE STANDARD. 

KITTING STNADARDS

100

IF YOU DETECT DAMAGED OR UNSEALED PACKAGING ON OUR PRODUCTS YOU SHOULD

NOTIFY YOUR TEAM LEADER OR MANAGER. 

200

YOU SHOULD NEVER LEAVE YOUR_____UNATTENDED

WHAT IS STAMP

300

THIS OPERATOR CAN VERIFY ALL OPERATIONS WITHIN CELL 2 ONCE ALL PROCESSES HAVE BEEN PERFORMED. 

WHAT IS CELL 2 OPERATOR 

400

NAME ANY  3  OF THE 5 FINAL KITTING STEPS....

1. VERIFY THAT THE JOB SHEET HAS BEEN STAMPED AND COMPLETED CORRECTLY

2.VERIFY THAT THE MATERIAL BATCHES HAVE BEEN IDENTIFIED. 

3.APPLY ALL MATERIAL BATCHES AS REQUIRED BY THE JOB SHEET

4.COLLATE MATERIAL IN LINE WITH THE JOB SHEET.

5.VERIFY THAT THE QUANTITIES ARE CORRECT 

500

GIVE 3 EXAMPLES OF THE RULES TO FOLLOW WHEN USING YOUR STAMP

1.ONLY STAMP OPERATIONS THAT HAVE BEEN PERFORMED.

2.NEVER GIVE YOUR STAMP TO ANOTHER OPERATOR. 

3.NEVER USE A STAMP NOT ISSUED BY VELOCITY

4.MAKE SURE YOUR STAMP IS LEGIBLE

5.REPORT TO TEAM LEADER OR MANAGER IMMEDIATELY IF YOUR STAMP HAS BEEN LOST, DAMAGED, OR STOLEN.

CUTTING OPERATIONS

100

LOAD INTO CUTTING PROGRAMME

OPERATOR 1-B

200

OPERATIONS ARE PROCESS STEPS REQUIRED TO LAUNCHING A CUT ARE PERFORMED BY:

WHAT IS CELL 1 OPERATIONS

300

WHEN PROCESSING MATERIAL THROUGH ROLL EFFICIENCY WHAT MUST YOU ENSURE?

ALL CUTTING DATA IS ENTERED CORRECTLY.

400

THIS MUST ALWAYS BE VERIFIED PRIOR TO CUTTING

WHAT IS -AMBIENT EXPIRY AND -18 LIFE

500

IN OPERATION 1-B ONLY THESE 3 FILE EXTENSIONS ARE PERMITTED TO BE CUT IN PRODUCTION:

WHAT IS .KIT, .NLT, .GTK