Loading
What's the mm measurement from the bottom of the for wrapping Asecond
30 or 60
what is the insulation called that gets tied to clamps
clamp insulation
the big crimp gun is considered to be what series?
250 series
before I look up my unit number on the CPU what folder do I need to be in first?
FINAL
how many points are u allow in three months?
we perform this action once a unit has been upended from the stack table
meggar test
what PPE is required when yoking? (5 part answer)
steel toes, safety glasses, hard hat, arm sleeves, shoe covers
what is the proper name for black tape?
Carbon tape
IF I needed to build a Superstructure what folder do I need to find?
Cleats & Leads
what's the time do you clock out
12pm
what item number are the mud flaps
item# 140 or 141
what tool do you need to remove the clamps from the unit?
10mm
what is the name of the file you will need to get from computer to pull up the instructions on how to crimp
Elpress
what folder will the clearance chart would be under?
cleats and leads
you are entitled to how much time for a break
15 min
what KV do we meggar test the units at?
2.5kv = 1000v
what's the name of the piece the clamp connects to?
flitch plates
how many times do you have to crimp a 630mm?
3x
what folder do i look under to see if its epoxy or Asecond?
Active Part
are cell phones allowed on the floor
NO!!
what wind kit aseembly would is needed next after landing C coil
winding C kit
what are the metal blocks that goes in-between the clamp and flitch plates
spacer block
what is the largest crimp we do here at this site
630MM
what is the name of the program we use to view 3d prints?
Creo View
How many raises can i get in a year potentially
NO!!