Measure Up!
The maximum length a tape measure blade can extend unsupported before bending or collapsing.
What is standout?
The construction term for creating or verifying a precise 90-degree angle.
What is squaring (or square)?
To drive a fastener into wood, the drill tip should rotate in this direction.
What is clockwise?
Hearing loss can occur when workers are exposed to prolonged noise levels starting at this decibel threshold.
What is 85 dB?
Most fatal ladder falls occur from heights equal to or less than this distance above the base.
What is 10 feet?
Numbers framed inside a red box on a tape measure appear at this specific layout distance.
What is 16 inches?
The flat lip of the speed square that must rest firmly against a board's edge to draw a square mark
What is the fence?
The adjustable vise mechanism at the end of a drill that tightens down to hold driver bits
What is the chuck (or keyless chuck)?
Official safety glasses must feature this certification label to verify impact resistance.
What is Z87?
The specific class of fire extinguisher designed to handle energized electrical fires.
What is Class C?
This precision technique bypasses the end hook by starting a measurement on the 1-inch mark.
What is "burning an inch"?
A classic side-length measurement ratio used on jobsites to verify a condition of square.
What is a 3-4-5 triangle?
The measure of rotational force exerted by the drill, controlled via numbered collar settings.
What is torque?
The document used on jobsites to outline product safety issues, chemical composition, and handling rules.
What is an SDS (Safety Data Sheet)?
Materials with a flash point under 100°F that ignite easily and burn rapidly are classified as this.
What is flammable?
These markings divide an 8-foot span into 5 equal parts for a 19.2-inch layout pattern.
What are black diamonds?
Beyond marking angles and short lines, a speed square frequently serves as a guide for this tool
What is a saw?
The recommended speed setting on a cordless drill when boring clean holes into wood.
What is high speed? (2)
The organization that tests and certifies safety equipment such as respirators.
What is NIOSH?
The required lean ratio when positioning an extension ladder against a supporting wall.
What is 4 to 1?
The total number of 1/4-inch segments found within a single inch on a tape measure.
What is 4?
A marking tool that utilizes a string coated with colored powder to mark long, straight lines.
What is a chalk line?
A pilot hole should match this specific dimension of the fastener to prevent splitting the material.
What is the shank size?
Placing objects between a hard hat shell and the suspension cage creates this safety hazard.
What is lessening its ability to absorb and isolate impact?
Along with fuel and heat/spark, this element completes the triangle required to produce fire
What is oxygen?