Cardinal Rules
Random Safety
Physical Audit
Random
100
Why are Cardinal Rules considered to be so important?
Violation of Cardinal Rules can lead to severe injury or death.
100
How many points of contact must you have when climbing a ladder.
A. 2
B. 4
C. 1
D. 3
D. 3
You must have three points of contact when working on a ladder.
100
Give an example of an obstructed exit route
Anything that blocks a route used for exit. (Combos, ladders, trash, pallets)
100
What date does the Safety Management Systems audit start and end?
1. August 20th-August24th
2. September 3rd-7th
3. October 1st-5th
4. August 27th-31st
1. August 20th-August24th
200
At what height is fall protection required?
4 feet
200
Where must all flammable liquids be stored?
Fire Proof Cabinets
200
All doors used for exit must do what?
Open in the direction of travel (outward)
200
How old is Fred?
34 years OLD
300
Name all 7 of the Cardinal Rules
1. Lockout/Tagout
2. Confined Space
3. PIT Training
4. Removing/Bypassing Guards
5. Torso Protection
6. Electrical PPE
7. Allowing/Instructing Others to break Cardinal Rules
300
According to the Hearing Conservation Program, when are employees supposed to have a hearing test performed?
Annually from the date of hire.
300
What does the acronym SDS stand for?
Safety Data Sheets
300
What is the safety topic of the month? (Line Meeting Topic)
Cardinal Rules
400
What is a Confined Space?
An enclosed area that is large enough that a human can fit inside but is not designed for human occupancy and has a restricted entry and exit.
400
Name the designated areas where sharps containers are located.
Locker Rooms
and
Occupational Health
400
What does the acronym GHS stand for and why was it created?
Globally Harmonized System.
The Globally Harmonized System was introduced by the United Nations to ensure that all chemical labeling systems across the world were the same.
400
The Industry average recordable rate is 8%. What is our recordable rate goal at JBS Greeley Beef?
5% Recordable Rate.
500
Name the steps of Lockout Tagout
1. Notify employee in area that machine is being shut down.
2. Shut Down machine.
3. Isolate energy source. (Disconnect)
4. Lockout and tagout machine
5. Check for stored energy in machine prior to beginning work
6. Verify energy source is isolated
7. Notify employees in area prior to removing locks
8. Remove Lock and start machine
500
What is the signal for an emergency evacuation?
For an Internal Evacuation?
For an External Evacuation?
Air Horn
Short blast-Short Walk= Internal Evacuation
Long blast-Long Walk- Outdoor evacuation
500
What does the chemical H2S (Hydrogen Sulfide) smell like and how does it occur? What area of the plant is this chemical most likely to be found in?
H2S is produced by the breakdown of organic matter and human/animal waste. It has an odor of rotten eggs and after smelling it for a period of time at high concentrations it can deaden an individuals sense of smell. This chemical is most likely to be found in Rendering.
500
DOUBLE JEOPARDY
Name the 5 parts of the MEP Safety Paperwork
1. Area Inspections
2. Touch and Go's
3. PPE Checks
4. Hearing Tests Completed
5. Authorized Training