Safety Wire
Type of wire used for shear applications.
What is copper wire?
Material for general use cotter pin.
What is carbon steel?
The part that is deformed on the eddie bolt during installation.
What are lobes?
This is a corrosion resistant pretreatment.
What is alodine?
The metric unit for measurement most commonly used in manufacturing.
What is millimetre?
Wire used only on magnesium parts.
What is aluminum wire?
You use this material when you bolt and nut are stainless steel.
What is stainless steel?
The tool used to squeeze rivets.
All of these still apply during touch up.
What are ESH regulations?
What is .01?
The length of a pigtails.
What is .25" to .5"?
The method where you start at the lowest torque value and try to align the nut up with the hole in the bolt.
What is torque alignment?
These fasteners were pounded into place.
What are Hi Loks?
The first step in the touch up process.
What is cleaning?
The smallest decimal value that a caliper will measure to?
What is .001?
Method where safety wire must be in a geometrical shape.
What is Single Wire method?
The method of install where the cotter pin is twisted and the prongs are bent around the nut.
What is the alternate method?
These fasteners are pulled to install them.
What are blind fasteners?
The amount of time a paint can must be shook.
What is 15 minutes?
The smallest value a micrometer will measure to.
What is .0001?
Max distance between fasteners using double twist method.
What is 6"?
Type of nut used with cotter pins.
What is castellated nut?
Tool used in addition to rivet gun to form upset head on rivets.
What is a bucking bar?
The amount of time a mixed coating must sit before it can be used.
What is induction time?
Name of the system that uses marks that line up to calculate smaller dimensions.
What is the vernier scale?