TOP
Purcellville
Basham
Wastewater
WWTP
100

The mode of operation in which permeate water is pumped into the membrane fibers, forcing flow in a reverse direction to remove any accumulation of solids from the membrane fiber surface.

Backpulse

100

Water that passes through the membrane pores from the feed side to the lumen side. Considered synonymous with filtrate or membrane-filtered water.

Membrane Permeate

100

How much air in cubic feet per minute does one membrane train get?

1750 CFM

100

What is the volume of 1 membrane basin at typical operating level?

20,000 gallons

100
What is the horsepower of one membrane blower?

100 hp

200

Excessive buildup of material on the membrane surface, or within its pores, that is not readily removed by routine membrane-cleaning processes.

Fouling

Fouling reduces the active surface of membrane area and permeability.

200

Pressure differential across the membrane surface. Values are affected by temperature, and flux through the membranes.

Trans Membrane Pressure (TMP)

200

What horsepower are the membrane tank drain pumps?

25 hp

200

How long is one membrane basin?

33 Feet

200

Are the membrane blowers on a variable frequency drive?

No

300

The hollow interior, small central space in a membrane fiber, through which filtered water flows.

Lumen

300

How many modules are in 1 membrane cassette?

48

300

How many gallons of chlorine does the clean program use in a clean?

20 gallons

300

How wide is one membrane basin?

9 feet

300

What is the CFM output of one membrane air compressor?

37.2 CFM@ 175 psi

400

A group of membrane fibers assembled as a unit for insertion in a membrane cassette

Membrane Module

400

What is the surface area of membranes per train?

48,970 square feet

400

How many gallons of citric acid does the clean program use in a clean?

70 gallons

400

How deep is one membrane basin?

12 feet- 9 feet operating depth

400

What is the capacity of the membrane crane?

5 ton

500

Assembly of membrane modules in a frame, with permeate and air connections, which can be isolated and removed from a membrane train.

Membrane Cassette

500

What is the total surface area of all membrane trains?

195,840 square feet

500

What is the current soak time for a membrane clean?

 2 Hours

500

What is the capacity of one membrane train?

0.38 mgd

500

What is the hold time for a TSS Sample

7 Days