Fire Safety
Name a location of a fire extinguisher at Vesuvius USA
Where is:
a map here
What is the minimum requirement for P.P.E. in all non-office areas in the PI building?
What are safety glasses
Name the location of an eyewash station at PI?
Where is:at every sink in the lab excluding toilets
When driving forklifts around corners what should you do?
What is honk your horn
All personnel working in or on machinery, or entering the area of a machine under LTT must have and do what?
A personal lock and to apply it prior to commencement of work.
Name the location of the meeting area after an evacuation.
Where is the back of back parking lot in designated areas of V_7_8
Name any item of PPE that would protect your head or face, besides safety glasses.
What are hard hats, bump caps, face shields, welding helmets...
If you are injured who should you report it to?
Who is your manager or the Safety Manager
You should always wear this item when driving forklift?
What is a seatbelt?
All Lock Tag and Try devices and work instructions must be reviewed at least ______________.
What is every 12 months (and formally documented)
Where do you aim the nozzle of the fire extinguisher?
Where is the base of the fire.
What item of P.E.E. could protect your feet from injury?
Steel-Toe or Composite Toe Boots
Name the acronym for the chemical fact sheets that communicate hazards.
What are SDS or MSDS
You should always do this before getting on a forklift?
What is Pre-Shift Inspection?
Standardized Work Instructions must be developed for LTT on all machines and equipment. Name two of the 8 minimum requirements of these instructions.
1. the list of all operations requiring LTT, whether Full or Partial (eg: cleaning, preventative maintenance, inspections, repairs)
2. instructions for cordoning off the area and signage
3. Order in which locks are applied and checks are carried out (Try)(for Full and Partial LTT procedures)
4. detailed instructions on where to place machine lock keys and personal locks. Clear instruction that personal keys MUST be kept by each participant
5. For the return to operations after tasks are completed, checking that tools and locks have been removed and safety guards are in place.
6. Instructions for LTT operations that covers more than one shift.
7. Reaction rules in case something goes wrong
8. Detailed instructions for the isolation of the machine, including Locking, Tagging, AND Testing of each locking point
Name a location of a pull station at Vesuvius PI
Where is:
Where can YOU get P.P.E. on site?
Supervisors, Safety Manager, the PPE cabinet, and hopefully Safety Reps, maybe Don M
Name a member of the Safety Committee
Ryan Matkaitis, Jeff Wilson, Linda Davis, Chuck Fullwood, Ken Handyside, Sahar Mokhtari, Tim Tracy
Where should the load be positioned on the forks?
Lead should be back against forks or cage.
THE PERSON accountable for ensuring this standard is fully implemented,
Who is Mark Snyder - SITE MANAGER
What does P.A.S.S. stand for when using a fire extinguished?
What is Pull-Aim-Squeeze-Sweep?
What does P.P.E. stand for?
Personal Protective Equipment
Name a member of the First Response Medical Team here at PI
Eric Bell, Jeffrey Wilson, Dan Starr, Sandra Baird, Seth Cochran
Forks should extend at least what ratio of the load you are lifting?
What is 2/3
All-new, refurbished, or overhauled equipment must be capable of ____________.
What is "Being locked out."