brakes
Foot lever for operating master cylinder and power booster
what is the brake pedal assbemly
the power plant of automobiles
what is the engine
–Side-to-side vibration of front wheels caused by part wear in suspension system
what is front end shimmy
–Strengthen body plies and stiffen tread
what are belts
Use to dry and clean parts washed in solven
what is a blowgun
–Assembly that holds hydraulic cylinder, piston, seals, and brake pads
what is the caliper
keeps the oil off the cylinder walls
what are piston rings
–Distance from specific point on vehicle to ground
what is curb height
tires are measured in
what is millimeters
–Fit between plates to keep them from touching and shorting
what are separators
–Allows air to be removed from hydraulic brake system
what is the bleeder screw
the four storkes of a ice
what is intake, compression, power, exhaust
–Worn suspension system parts allow wheels to go out of alignment
what is tire wear
–Extra wheel and tire assembly that can be installed in case of flat tire
what is the spare tire
how many years does it take to be ASE certified
what is 2 years
–Consists of cylinder or housing, expander spring, rubber cups, pistons, dust boots, and bleeder screw
what is the wheel cylinder
the lager vavle
what is the intake vavle
•may produce loud clanking or banging sound
what is a loose or damaged shock
–Pressed into hole in wheel of tubeless tire to allow inflation and deflation
what is the vavle stem
what are the three main sizes meachanics use
what is 1/4,3/8,1/2
–Turns on dash light if brake fluid in master cylinder becomes low
what is the brake switch
hallow area between top of the piston and the bottom of cylinder headwhere fuel is burned
what is the combustion chamber
–Affects ride and appearance of vehicle
what is spring fatigue
–Allow wheel to turn freely around spindle, in steering knuckle, or in bearing support
what is wheel bearings
name all six wrenches
what are open-end,combination,line wrench.ratching,socket,box-end