Basic Electric
Misc.
Basic Ignition
Magnetism
Wires and such
100

Current that flows in one direction

Direct Current or DC

100

What would be the required spark in a four stroke engine that is spinning 4500 rpm?

2250 sparks per min

100

This is most often the piece that will break in basic solid state ignition systems. 

Stop Switch or On/Off switch

100

All magnets produce what effect

Magnetic Field

100

What is a benefit of stranded wire.

Flexible

200

What is a material with bound electrons called?

Insulator

200

What is the term for firing the spark plug at the exact intended moment. 

Ignition Timing

200

What is the first thing you do when diagnosing a ignition/engine running condition problem.

Check for spark

200

This conductor used in ignition coils is not magnetic.

Copper

200

This is the most common type of circuit protection device used to protect from excessive current flow.

Fuse

300

This is the resistance to current flow and is measured in?

Ohms

300

Device inserted into the combustion chamber that ignites the compressed air-fuel mixture. 

Spark Plug

300

This is the primary purpose of the ignition system.

Supply voltage to create spark

300

This material is not used in ignition coils because it will retain its magnetic properties after it has been magnetized. 

Steel

300
When comparing wire size what would a larger gage size indicate. 

Smaller wire/Smaller conductor

400

What type of material has free electrons?

Conductor

400

These are mounted to the flywheel and pass the ignition coil on simple solid state ignitions. 

Magnets

400
What stroke does the spark plug fire on?

Compression Stroke

400

This is "turned into" a magnet in an ignition system when energized. 

Ignition Coil Iron Core

400

This determines the amount of current a wire is intended on carrying. 

Gage size and length

500

This is the unit of measurement of the number of electrons flowing past any given point in a circuit. 

Ampere

500

If the copper windings in an ignition coil did not have this it would cause a short to ground.  

Insulation

500

What is used to release the voltage from the ignition coil?

Switching Device

500

This person discovered the flow of electricity will flow through a copper conductor when in proximity of a magnetic field. 

Michael Faraday

500
This is often used in the secondary wire of the ignition to prevent radio frequency interference. 

Carbon wire