Pump
5 PSI
What are 2 ways to purge a unit?
Scrubber only mode, changing recirc timer, starting the unit. and then the system pressure
What does RO and DRE stand for?
Residual oxygen, and Destructive removal efficiency
What do you do if you bump into a problem you cant solve in 15 minutes?
Escalate
Whats the best flavor in BWW?
Medium/Desert heat
How do you adjust the N2 on an IXH pump
One time gas regulator adjustment
For pressure leak checks, what do you pressurize the abatement to, the head, and the bypass to?
16 inches of water, 2.1 psi, and 5 psi
What 3 things do you use to adjust RO?
Butterfly valve, premix fan set screw, Premix fan speed
What do you do if you need to know the location of the orficies?
Orifice location kawi
Whats the best burger right now?
Carls jr. teriyaki burger
What are all the major steps to configs?
Default, delete configs, upload configs, transfer configs, date and time, host name, ip address, power cycle pump, cycle gate valve with PDT
How many holes must be punched in the air cyclone for a 6 inlet head?
5 holes
What 3 values do you look at when adjusting RO?
RO, combustor backpressure and total fuel flow
FreeBIE
Freebee!
Could jose fist fight a cow to submission?
Yes, easily
What are at least 4 things that could be wrong if a brand new pump isnt basing down?
A lot, at least 27 from a report
Why do we put tape over the green button?
So that the techs know to check the manual iso to avoid dead heading the pump
What do you do if your head has a capped inlet? What is one of the injects connected to?
You remove the high pressure N2 purge line
What are 5 LSS alarms and what do they do?
HPM, VESDA, Vertex, Midas, Seiger, TAS
What is this: Young femboy wants big burly man as bodyguard, so sister goes to fight him, loses and then femboy escapes with an ogre, where he gets put inside an egg
Elden ring
what do you do if the pump exhaust is at -16 PSI?
Exhaust pressure zero sensor
What are 5 upgrades from legacy to iatlas
PLC vs HMI, no lights vs lights, interior loto vs exterior loto, copper lines vs stainless steel, filters vs hydrocyclone, self priming pump vs manual priming pump, flame redardant C-PVC vs PVC
What are at least 5 things you do to prepare for RO?
HMI mode, O2 LOTO, Turn off N2 purge, Cap harsh duty head purge, turn off atomizer, Cap blanked inlet purges
What do you make sure is LOTO'd before putting on packed tower pressure test lid?
N2
What is my favorite countrys food?
Japan