Shop Practices
Wheels & Tires
Steering
Suspension & Frames
Brakes
100

Acronym or Short Form For Personal Protective Equipment 

PPE

100

An Imbalance or Heavy Spot in the Centerline of the Wheel Assembly

Static Imbalance 

100

The Most Common Steering Setup Used Today

Rack And Pinion 

100

The Component Is Used to Reduce Body Roll and Sway in Corners 

Sway Bar / Anti-Roll Bar

100

A Precision Measuring Tool Used to Measure Rotor Runout

Dial Indicator

200

Prior To Working With A Hoist This Must Be Completed

Hoist Inspection 

200

An Underinflated Tire Will Cause Excessive Tread Wear Here

Outer Edges

200

The Component Attached to the Steering Rack That Connects to the Steering Knuckle

Outer Tie Rod End

200

Most Trucks Use This Style Rear Suspension 

Leaf Spring

200

A Precision Measuring Tool Used to Measure Rotor Thickness

Micrometer

300

A Basic Suspension Test Where You Push The Frame Down, Suspension Comes Up Than Spring Compresses

Jounce Test

300

The Load Rating on a Labelled Tire 275/35R22 103V

103

300

The Component That Attaches the Steering Column to The Steering Rack

Steering U-Joint

300

Measurement From 1 Wheel Hub center To The Other Wheel Hub Center When Viewed From The Side

Wheel Base

300

A Single Piston Caliper That Slides on Pins

Floating Caliper

400

The Easiest Way To Check a Tie Rod End When The Suspension Is Unloaded On A Hoist

Visual Inspection When Moving Wheel Side To Side

400

An Imbalance Off the Wheel Centerline of a Wheel Assembly 

Dynamic Imbalance 

400

When discussing Steering Systems, What Does EPAS Mean

Electronic Power Assisted Steering

400

The Slight Overtightening of a Bearing on Installation

Preload

400

The Type Of Fluid That Is Used To Transmit Force

Hydraulic Fluid

500

Most Fluid Levels Should Be Checked With The Engine Off, But This Fluid Requires The Engine To Be Running To Check Level

Transmission Fluid

500

The Aspect Ratio on a Labelled Tire 245/40R18 99Y

40

500

The Name Of The Nut That Holds Your Outer and inner Tie Rod Adjustment in Place

Jam Nut

500

A Ball Joint That Is Not Load Bearing Would Be Called

Follower Type

500

What Physics Law States "Force Applied to a Liquid Is Transmitted Equally & Undiminished" 

Pascals Law