Interiors
Product Choice
What product am I?
Preparation
Application
100

Non-ambering clear coat used to maintain the grain and color of bare wood inside a home.

What is Glacier?

100

Use this product for a large back deck that is very low to the ground, wet and gets a lot of snow.

What is Dec?

100

This interior wood finish provides Class A Flame spread protection available in clear or colored tones.  

What is Firestop 99?

100

This product can be used to clean a natural cedar deck that has mildew and gunk on it.

What is Multiwash?

100

Do this before applying a second coat if it has rained since the first coat was applied.  

What is clean and scuff sand?

200

A product that can be recommended for interior ceilings where a natural warm finish is desired.

What is Clear or Floor?

200

Use this pre-tinted, 1 coat product on a newly built deck using pressure treated lumber.

What is Pressure Plus?

200

1-step natural wood treatment for all types of
pressure treated lumber, new or existing.

What is Pressure Plus?

200

You should use this grit sandpaper for an exterior deck.

What is 60-80 grit?

200

Reference this document for all information related to your Sansin Products.

What is the Product Data Sheet?

300

Use this product to coat kitchen cabinets that were previously coated with an unknown coating.

What is Floor?

300

Use this product when your customer is redoing their deck and refuses to use anything that requires more than 1 coat.

What is SDF?

300

This concentrated, low VOC, traditional oil provides a finish that protects and defines wood color and character.  It is a full, rich, penetrating finish in just one coat and can be used on any interior wood surface
where a natural oil look is desired.

What is Nature's Oil?

300

Do this process to pressure-treated wood before applying stain.

What is sanding?

300

This brush is Sansin recommended for exterior stain application.

What is a chinex bristle brush (Corona Brush)?

400

Look here to know if you need to sand between interior coats and what grit is recommended.

What is the Product Data Sheet?

400

The best exterior, 2-product system to use where a film-forming finish is desired.

What is Dec/ENS?

400

This two-part, marine grade, environmentally-friendly, Non-Grain Raising wood finish system is tougher, more beautiful, more maintainable and longer-lasting than
traditional varnish.

What is Resolution 1 and 2?

400

Use this product to remove paints, stains, sealers and water repellents from decks and railings

What is Wood Strip?

400

The glossy film that develops on milled lumber during the production process that can prevent deck stain from properly penetrating the wood.

What is Mill Glaze?

500

What every customer should do to ensure that their desired color and look is to their satisfaction.

What is do a test sample on actual substrate?

500

This system is used for the longest lasting results for your deck.

What is Dec + 2x Dec Topcoat?

500

This invisible penetrating wood treatment protects and stabilizes logs, timbers and laminated lumber and can lighten the color of wood.  Available in Fir, Cedar or Light Wood Tones.

What is Foundation?

500

Use this product to prepare a deck if it is unknown if a previous coating was applied.

What is Wood Wash?

500

The timeframe you should coat within after sanding our wood.

What is 2 weeks?