What engine is in the D series
Kubota
What engine is in the Next Gen machines?
Caterpillar
What does Def Consist of?
1/3 Urea
2/3 deionized water
when starting a slot, how do you start it?
front to back. just like a dozer
On a BRX318 what do the last 2 numbers represent?
the width in metric. 1.8 meters which is 71 inches
On the torsion suspension, why is there 2 grease zerks?
inside AND outside of the torsion axle bushing. both must be done
What type of undercarriage suspension does the 275 and 285 have?
equalizer bar
When do you shut off the Primary disconnect Switch?
After the purge light
when loading into a truck, how do you engage return to dig function
press your right joystick trigger and go to the 10:30 position
D3 and next gen skidsteers use hydraulic
D2 and older machines were electric with a hydraulic upgrade
Which arm bar has the safety switch
Left hand side
explain priority drive power?
what is the horsepower rating for def?
75 HP to 750 HP
When running a GB120 how are the loader arms postioned
fully down, allowing the force of the blade to be transferred into the frame
there are four different flow ratings for attachments. what number expresses them.
1 Standard flow 20-23 GPM 2900-3336 PSI
2 High flow 25-31 GPM 2900-3336 PSI
3 High flow XPS 31-33 GPM 2800-4100 PSI
4 High flow XHP/XE 40-41 GPM 2800-4100 PSI
these machines have two IMU's, where are they?
right hand side of loader linkage, imu on the quick attach plate.
which machines are built in North Carolina and whats made in Brazil
255, 265, 275, 285 NC
all Wheeled skids W/ 239, 249
what tank is next to the DEF fill on D3 series?
Hydraulic
how do you engage smart mode on D3 series machine attachment?
acknowledge the message in the right upper screen, or press the shovel symbol in the display.
What Smart attachment can be ran on the 255 that couldn't be the 259?
Smart dozer blade. Closed center hydraulic valve. standard on all next gen
What is the green on the throttle dial?
272 and 299. throttle dial has a green area where the machine has active regen, lesser of that is Passive regeneration
What does the XE do for power?
when a hydraulic attachment is plugged in, to tell the system to activate the full power of the machine along with hydraulics.
How old is RED (Eric)
no one knowssss
what setting do you need to change when finish grading?
turn ride control off, or adjust the speed activation in the screen.
No. nothing BCP