Enter Title

1tryTorFArty

100

The maximum and minimum quadrants do not change even if the type of ammunition

T or F

False

200

If a track is thrown while the vehicle is moving, apply the brakes; and force the vehicle to a halt.

T or F

False

300

The tolerance when verifying boresight using the M140 alignment devise is +/-0.5 mils

T or F

True

400

In a M221A2, a functional check of glow plug system must be performed whenever operation in ambient temperatures below 60oF (10oC)?

False below 50

500

Discontinue using APU if hydraulic pressure gage reads below 200 or over 400 psi.

False below 100

arty

100

The fuze setter used to set a M577 fuze is the

M35

200

During Pre-Fire Checks, the Recuperator Pins must...?

Extend from 1⁄4 to 3⁄4 in

300

If major work on the recoil system has been done by Direct Support or General Support Maintenance, you should use a ______ foot lanyard to fire the first round?

50

400

All ammunition placed on the ground should be stored on how many inches of dunnage

6 inches

500

Name the 8 external parts of the round

al parts of the round?

         1. Eyebolt Lifting Plug

 2. Ogive

 3. Bourrelet

 4. Body

 5. Rotating Band / Obturating Band

 6. Base Cover

7. Base

lvl 10

100

During pre-fire checks you measure the distance from the rear face of the cannon tube to

the rear breech ring. What must this distance be?

5 inches

200

misfire occurs on a “Cold Tube”, what should you do next

Yell “Misfire”, attempt to fire two more times, and then wait two minutes.

300

What is the approximate weight of the M09A6 breechblock?

125lbs

400

During position improvement, what does the driver install in order for the gunner to conduct boresight?

M140/M140A1 alignment device

500

The DA 4513-R has four basic parts consisting of:

Administrative Data, Ammunition/Fuzes on Hand, Fire Mission Data, and ammo expended

 

lvl 10

100

 What round must be stored standing up on its base?

M110 white phosphorus 

200

When cleaning the breech, the obturator pad should be cleaned with

Warm and soapy water

300

Bonus question if your wrong -200 points

Or choose to pass to another team for x2 +/-400

What is the weight of the excal with the casing 

150

400

What fuze is used with the M825 projectile

M577

500

The M762 and M767 Electronic Fuze is se tto PD mode at ____________ sec.

Black triangle 98.0

lvl10

100

Split rings must be 

180 degrees

200

What is the cat nomenclature 

M992A2

300

What does EPIAFS stand for? What is the nomenclature to set a M762 fuze?

Electronic Portable Inductive Artilery Fuze Setter (PIAFS) M1155 (9-1290-210-12&P)

400

The __________ primer is the only authorized primer to be fired in the _________ cannon (nomenclatures)?

M82 and M284

500

On a M109A6, what is the maximum number of stored projectiles and propelling (M231/M232) cannisters?

37 and 2 non conventional