Chapter 6
A ______ is used to bend heavy-walled steel tube with up to 1/8" wall thickness, stainless steel tube with up to 3/32" wall thickness, and hard copper water tube Types K and L.
What is geared ratchet bender
A __________ is best used in close quarters to tighten water supply connections to the facet and slip nuts on fixture traps
What is basin wrench
___ is the distance between the upper and lower limits of travel on a hoist.
What is lift
According to OSHA color coding, ___ is used to indicate safety devices and locations of first aid equipment.
What is green
To determine approximate noise reduction in the field, ___ dB is subtracted from the NRR.
What is seven
___ dies are used for small pipe sizes and are the most common type of die used.
What is full width
___ are used in HVAC work to test hermetic and semi-hermetic compressor windings and oil condition.
What is Megohmmeter
A ___ is a lever-operated pulling device that consists of a frame, handle, gears, locking pawls, braided steel cable, and locking hooks.
What is cable puller
Appropriate PPE, including a sealed full-body suit with a respirator, must be used when working in areas with airborne ___.
What is asbestos
A(n) ___ is a container designed for the safe containment of cloth and paper soiled with flammable materials.
What is oily waste can
NPT pipe thread consists of a section of approximately ___to ___ perfect threads at the end of the pipe.
What is 5 to 12
A ___ guard is a device used with powder-actuated tools for the purpose of providing protection from flying pieces of concrete.
What is spall
A Type ___ web sling configuration is an endless web sling made by joining the ends with a load-bearing splice.
What is type 5
___ are used to hold fly sections at the desired height.
What is pawl locks
___ ladders are commonly 2'-0'' to 8'-0'' in length.
What are step ladders
What is roll
A ___ rope is an inherently nonrotating rope.
What is plaited
A ___ suspension scaffold is a suspension scaffold supported by two overhead wire ropes.
What is two point
Connectors, such as D-rings and snap hooks, must have a minimum tensile strength of ___ lb.
What is 5000
A(n) ___ lift is an aerial lift in which the work platform or bucket is raised and lowered through two or more hinged sections.
What is articulating Z boom
What is a Soil pipe assembly tool?
What is A hand tool with a lever and pulling chains that provides the leverage necessary to pull hub and spigot ends or fittings together when assembling a hub-and-spigot compression joint.
The ___ wire strand pattern has alternating large and small wire sizes in the outer layer.
What is Warrington
___ are used for verification of component dimensions such as thickness, diameter, and depth.
What is a micrometer
A ___ is a squaring tool that has an adjustable blade used to transfer or test specific angles.
What is a sliding T bevel
Class ___ lasers include low-power visible laser beams that normally do not present a potential hazard if viewed for short periods of time.
What is class 2