Fire
Detection
Extinguishing
Agents
System Indicators
&
Discharge
Smoke
&
Gas
Fire Classes
&
Procedures
100

Thermal switches are heat-sensitive units that complete circuits at a certain temperature. How are they wired?

 ____ with each other, but in ___ with the indicator lights.


Parallel, Series 

100

The types of fire extinguishing agents for aircraft interior fires are:

Water, carbon dioxide, dry chemicals, and halogenated hydrocarbons.

100

What method is used to detect the thermal discharge of a built-in fire-extinguisher system?

Rupture of the _____ plastic disk in the thermal discharge line. 

red

100

Smoke in the cargo or baggage compartment is commonly detected by which instrument?

Photoelectric Cell

100

Fire defined as ordinary combustibles (wood, cloth, paper, upholstery) is:

Class A

200

Smoke detection instruments are classified by their method of:

Detection

200

Which fire-extinguishing agent is considered the least toxic?

Halon 1301

200

Evidence that a built-in extinguishing system has been intentionally discharged is indicated by the absence of a:

Yellow

200

Smoke detectors that rely on measuring light transmissibility are called:

Photoelectric smoke detectors.

200

Fire involving flammable petroleum products, combustible liquids, grease, solvents, and paints is

Class B

300

The most common cause of false fire warnings in continuous-loop detection systems is:

Dents, kinks, or crushed sensing elements.

300

The proper fire-extinguishing agent to use on smoldering fabric (non-electrical fire) is:

Water

300

What must be taken into account when checking a fire-extinguisher container for pressure?

Ambient Pressure

300

When air contains carbon monoxide, portable CO detectors with yellow silica gel turn:

Green

300

Fire defined as combustible metals such as magnesium and titanium is:

Class D

400

A thermocouple in a fire-detection system causes the warning system to operate because:

It generates a small current when heated.

400

 A squib, as used in a fire-protection system, is:

A device used for causing ….?

the fire-extinguishing agent to be released.

400

If a fire-extinguisher cartridge is removed from a discharge valve, it should be:

Used only on the original discharge valve assembly.

400

A contaminated carbon monoxide tester that started tan will turn:

Darker shades of gray to black

400

Internal engine tailpipe fires during shutdown or false starts can be:

___ ____by motoring the engine with the starter.

Blown out 

500

All transport category airplanes are required to have what installed in cargo and baggage compartments?

Smoke Detectors

500

A CO₂ fire-extinguisher container can be checked to determine its charge by:

Container and contents.

500

Maintenance of fire-detection systems includes the:

Replacement of damaged sensing elements.

500

According to your instructor, fire is:

Bad 

500

Which items must be observed as fire precautions when working on an oxygen system?

  1. Display “No Smoking” placards.
  2. Provide adequate fire fighting equipment.
  3. Keep all tools and oxygen servicing equipment free from oil or grease.
  4. Avoid checking aircraft radio or electrical systems.

1,2,3&4