WMPs
In what WMP does cotton belong in?
C (Cellulosic)
If an in-line drum weight is 36.1kg in Attachment 2 what would the packaging weight be for the WMP ST?
36.1kg - 8.0kg = 28.1kg
What is the unit of measure for weights to be recorded for VE
In kg out to the 10th place.
Ensure operators assigned to perform VE are qualified by reviewing the current ____________.
List of Qualified Individuals (LOQI)
List the QAOs.
Precision
Accuracy
Completeness
Comparability
Rust chips belong in what WMP?
IM (Iron-Based Metals/Alloys)
If the packaging tare weight is 146.7kg and the gross weight is 153.9kg how much kilograms were disposed of in this drum?
153.9kg - 146.7kg = 7.2kg
CCP operations performance requires what to fill-out attachments?
An open copy of CCP-TP-113 (current Rev) at the step we're on in the procedure.
Ensure a ______________ is assigned to the facility in which work will be performed as indicated on the NDE Personnel Waste Stream Qualified List of the LOQI.
VEE (Visual Examination Expert)
What does SFTP stand for?
Secure File Transfer Portal
What two WMPs could coveralls possibly go into?
Cellulosic (C) or Plastic Waste (PW)
If a POC tare weight is 147.2kg what would the ST WMP be?
147.2kg - 8.1kg - 21.0kg = 118.1kg
____ will be someone, other than the VEO, who is qualified to have performed the work and who was not involved in the generation or recording of the data under review.
Independent Technical Reviewer (ITR)
Ensure NO _______ that would prevent the performance of VE are on the containers.
hold tags
Define "Layer of Confinement"
Any boundary around a volume greater than or equal to 4 liters that restricts, but does not prohibit, the release of hydrogen gas across the boundary.
Gallium Oxides and Uranium Oxide belong in which WMP?
(OI) Other Inorganics
While filling out an attachment 7 for a Savy Recovery you are given the tare weight of a 5 Quart Savy for 3.9kg. The inner item on the attachment 2 is 1.1kg. If the gross weight is 5.4kg what is the estimated weight of filtered bag and tape?
5.3kg - 3.9kg - 1.1kg = 0.3kg
According to CCP-TP-113 Rev. 26 section 4.2 NOTE what has to be done prior to the initial use for the day?
A scale/dynamometer operational check.
Ensure containers prepared for VE meet packaging configuration stated in ______________.
Acceptable Knowledge Summary Report (AKSR)
U134 or HF refers to what hazardous waste materials?
Hydrofluoric Acid
Name all 5 WMPs "labware" can go into.
IM, AM, OM, OI, & PW
If you have an in-process "out of line" drum that has a packaging tare weight of 29.1kg and ILPs weighing 15.1kg with a gross weight of 49.8kg, how much is the additional weight put into the drum that's in the WMP of Attachment 2?
49.8kg - 29.1kg - 15.1kg = 5.6kg
Per CCP-TP-113, Rev.26 Section 4.7 when can the FOC drum filter and ring bolt be torqued by Host site personnel?
When VEOs have completed their inspection of waste and packaging, and information is recorded on Attachment 3.
Download and save approved ___________________ from a secure CCP website, in order to verify calibrated equipment when needed.
Measuring and test equipment (M&TE) list
Name all 10 WMPs in the Waste Material Data section of attachment 2.
IM (Iron Metals), AM (Aluminum Metals), OM (Other Metals, OI (Other Inorganics), C (Cellulosics), R (Rubber), PW (Plastic Waste), OR (Organic Matrix), IN (Inorganic Matrix), S (Soils/Gravel)