Woodshop
This grit number on sandpaper indicates a rougher surface.
Low numbers
This is the type of leather often used for carving and stamping.
Veg-tan
This type of fence uses high-voltage pulses to deter livestock from leaning on the wire.
electric
This safety device "trips" and cuts power when it detects an overload in the circuit.
breaker
What is the machine called that is used normally for cross cuts?
Chop Saw or Miter Saw
This tool uses a metal blade to shave off thin layers of wood to flatten a surface.
Planer
A _______ is primarily used for this specific leathercrafting task.
Swivel knife
Fence used commonly for horse pens?
Smooth wire or wood
In standard US residential wiring, the "hot" wire is typically this color.
black or red
What is the difference between (') and (")
Feet and Inches
To prevent wood from splitting when driving a screw, you should first...
Drill a pilot hole
What do you do before you stamp or carve the leather?
Wet it down (case it)
These specific posts are placed at corners and gates to take the tension of the fence line.
brace or corner posts
What color is the ground wire?
copper
What is used to keep electric wire fence from ground at posts?
insulators
These are used to keep wood together.
Screws and nails
What is the tool used to hit the stamps called?
Maul or mallet
What is the purpose of barbed wire?
To keep animals from rubbing against it.
What is the first step in changing an outlet?
turn off the breaker
What do you use to cover wires that are not connected to the power source or light switch?
Wire nuts/wire connector
What are two common lengths that 2x4s come in?
8 ft and 10 ft
What animal does veg tan leather come from?
Cattle
Insulators
What is the main tool used for wiring?
Wire strippers
What is used to test if the wire is hot still?
Voltage tester/Multimeter