ESLP is an Acronym for what phrase?
Equipment Specific Lockout Procedure
A person who is authorized by the Entry Supervisor to enter a permit space is called what?
Authorized Entrant
What term is used to describe the policy that three out of the four limbs are in contact at all times with whatever vehicle, ladder or stable platform you are mounting or dismounting from?
Three Point Contact
Any time the wheels of a car, locomotive, or engine come off the head (top) of the rail, it is known as what?
Derailment
Locations which flammable liquids or vapors are or may be present in the air in sufficient quantities to produce an ignitable mixture is known as what?
Class 1 Area
Which of the following can be locked out with a single lockout device: Conveyor, Pump, Breakroom Ceiling Fan?
Breakroom Ceiling Fan
How often must colleagues be trained in Confined Space Entry?
Annually
What is the minimum fall distance a working from heights permit is required for?
4 feet/ 1.2 meters
Encroachment is work being done on, above, below or within how many feet of the centerline of the track?
10 feet
All hot work must be stopped if the LEL in the affected area approaches what percent?
10%
If an energy-isolation device cannot be locked-out, what tag must be secured to the energy isolating device to notify people to not re-energize the device?
Tagout
How many confined space entry permits may an Entry Supervisor complete at one time?
One
What must always be used when utilizing stairways?
Handrails
What is the means of communication for all in-plant rail movement activities?
Radio
How long after how work has stopped is the fire watch required to remain present and attentive?
60 minutes/ 1 hour
Every lockout preformed requires documented verficiation that all steps are preformed correctly by how many authorized people?
Two
What inside the confined space must be tested prior to entering?
Atmosphere
SRL, a type of fall protection device, stands for what?
Self Retracting Lifeline
When crossing rail tracks, always step over and not directly on top of the rail or a what?
Switch
A hot work permit is required for prolonged use of any stationary continuously operated internal combustion engine (cranes, bobcats, forklift) within how many feet of a solvent or flammable area?
50 feet
There are five types of Machine Access for Process and Process Handling Equipment: Inspection Point, Clean/Clear Point, High Frequency Clean, Access Point, and what?
Sample Point
Confined Space Permits for the written standard must be retained for at least how long?
One year
On straight ladders, what portion of it supported length must the ladder be placed away from the vertical plane of its top support?
1/4 or 0.25
The RED ZONE extends how far from the couplers of all railcars?
25 feet
A limited space constructed inside a Classified area that has been purged and controlled to allow hot work to be performed safely without purging the entire classified area or building is called what?
Habitat