Employability Skills
Punctual
Showing up on time
What must be used prior to any paintwork on a panel?
Wax and Grease remover
Half Triger Pull
Only lets air out of the gun
What do you use to remove large defects in a fresh finnish
Razor, Nib File, 800 sandpaper on Block
Must be worn in lab at all times
Glasses, Uniform, Work Shoes/ Boots
Entering class prepared to achieve success.
Preparedness
What is the purpose of a Tack Rag
Remove loose dirt on surface
Full trigger pull
Atomized product out of the gun
Grit of sandpaper used to level off orange peel
1000 grit
First aid location
Tool Crib
Items you need before class starts
Uniform, notebook, writing utensil, safety glasses, work shoes
What is the purpose of Epoxy Primer?
Adhesion promotion corrosion protection
What is the job of the Air cap?
Atomize the product being sprayed
Most aggressive pad to start buffing
Wool
Long hair should be
Cut or tied back
What is the start time for this class?
9:15 and noon
Purpose of Sealer
Holds down all undercoats. Gives Proper Shade for basecoat to cover Quickly
What is the Job of the Fluid tip?
Meters the amount of product coming out of the gun
Used to remove compound after initial cut
Microfiber towel
Hot metal weld coupons should be handled with
Pliers. Do not burn Gloves
What does good personal management look like?
On Task, Good Attitude, Not Disruptive
Only Primer you have to sand if doing things corectly
Primer Surfacer
What three steps do you have to do to setup the spray gun?
Air Pressure, Fan Pattern, Fluid adjustment
Tool used to measure paint thickness
Electronic Mill gauge
What must you do if you injure yourself and need medical attention
Contact instructor