It is required to have this person remain outside the confined space to monitor entrants.
Who is the attendant?
When is a full body harness required?
What is working 4 feet or more above a lower level with an unprotected side, and when working from aerial lifts or elevated platforms?
True or False: It's okay to remove someone else's lock if they are not around.
What is False?
This is the definition of hot work.
What is any work that produces heat, sparks, or flames (such as welding, cutting, grinding)?
These documents must be issued before going into a confined space and performing hot work.
What is a confined space and hot work permit?
What is the minimum oxygen level required for safe entry into a confined space?
What is 19.5%?
This is the minimum improvised anchor point strength required for a fall arrest system.
What is 5,000 pounds per worker?
Name two types of energy that must be controlled during LOTOTO.
What are electrical, hydraulic, mechanical, pneumatic, or thermal?
How long must fire watch remain after hotwork is completed, and why?
What is 30 minutes to ensure no smoldering materials reignite?
When preforming hot work inside a confined space, what kind of permit is required?
What is both hot work, and confined space permits are required.
A harness shall be consistently inspected on these 3 occasions.
What is every time it is worn, after a fall event, once a year by a competent person?
True or False: If there is no place to secure a LOTO device to the equipment then you are not required to use one?
What is False?
What is the minimum safe distance from combustible materials when no protective blanket or shield is used?
What is 35 feet?
Name two types of personal fall arrest devices.
What is harness, tie back nano, quick connect, SRD, SRL, ladder system, davit system, etc.
What are the 3 types of hazards that can exist when working in confined spaces?
What are Engulfment, mechanical, and atmospheric hazards?
This D ring on the harness shall be used at all times EXCEPT when using ladder system.
What is the Dorsal D ring? Located on your back/neck.
What is the difference between affected and authorized employees?
What is authorized employees are the ones doing LOTO whereas the affected employees work near where LOTO is taking place?
List a hazard associated with hot work.
What is fire, explosion, toxic fumes, and burns?
What makes a space "confined" under OSHA definition?
What is limited entry/exit, not designed for continuous occupancy, and large enough to enter?
When vertically testing the atmosphere with the air monitor and wand, you want to test low, middle, and high moving the wand from bottom to top at what rate?
What is 1 foot per second?
Explain, what is the difference between fall restraint and fall arrest?
Fall restrain prevents reaching a fall hazard; fall arrest stops a fall in progress.
You've locked and tagged out the equipment. Before starting work, you must do this critical step to confirm isolation.
What is try out the equipment to verify zero energy?
Name two of the six Planned Safety Precautions from the Hot Work Permit.
What are flammable materials removed or protected, fire watch assigned, Fire extinguishers available, blind or double block pipe, duct, odor control systems, vapor recovery system, or secure conveyor systems, protect walls, partitions, ceilings or roofs
Before entering a confined space to perform hotwork at height, what are three critical safety steps that must be completed to protect workers from atmospheric hazards, energy sources, and fall hazards.
What is test the atmosphere with the air monitor, apply lockout tagout to isolate all energy sources, use appropriate fall protection?