Fire, Fire, Fire
It's an Agru rule!
Machine Guarding
Heat Stressed
Lockout Tagout/ electrical safety
100
According to most safety regulations, a company should conduct a fire drill how many times a year?

What is once a year

100

 all Agru employees working in the factories are required to wear  this when walking on the production floor.

What is steel-toed shoes 

100

You should do this to guards before you start working to make sure there is no damage to them and that they are working correctly. 

What is inspect. 

100

Making sure you are staying hydrated is one way to do this

what is prevent heat-related illnesses. 

100

This is who is allowed to remove a lockout/tagout lock.

who is only the person who locked it out. 

200

This is the distance you should stand away from a fire when using a fire extinguisher 

What is 6-8 feet

200

No matter how large or small, these two things must be done when there is an incident or an accident 

What is Report and Document 

200

This is the oldest and most used type of machine guard that includes devices such as wire cages, clear plastic shields or metal covers that create permanent protective barriers

What is a fixed guard

200

abnormal thinking or behavior, slurred speech, seizures and loss of consciousness are all signs of this 

What is a medical emergency 

200

The person who is responsible for locking out or tagging out machinery or equipment before maintenance or repairs. 

What is an authorized employee

300

When using a fire extinguisher, this is what the Acronym PASS stands for:

What is Pull, Aim, Squeeze, Sweep.

300

It is mandatory that you have these on when using any type of cutting utensil while working. 

What are cut resistant gloves 

300

 these types of guards must be inspected before each use and if there is a change in a guard set up. 

What is adjusting and self adjusting guards

300

The body's response to an excessive loss of water and salt, usually through excessive sweating.  Symptoms are headache, nausea, dizziness, weakness, irritability, thirst, heavy sweating, elevated body temperature, decreased urine output. 

What is Heat Exhaustion 

300

The people who work near or operate equipment that is being serviced or maintained under lockout/ tagout. They are not allowed to perform the lockout/tagout procedures but must be aware of the procedure and avoid interfering. 

Who is an affected employee

400
This is how often the National Fire Protection Association requires a fire extinguisher that is located inside a building needs to be inspected.

What is once a month. 

400

Agru America staff are not to use these while in the production, shipping or lab area

What are headphones or earbuds.

400

These guards use an electronic sensor that will not permit a machine to run unless the guard is in place.

What is interlock guards

400

This is the most serious heat related illness. It occurs when the body can no longer control it's temperature. symptoms are confusion, loss of consciousness, Hot, dry skin or profuse sweating, seizures, very high body temperature

What is Heat Stroke

400

These are warning devices affixed to energy-isolating devices  and do not provide the physical restraint of a lock.

What are tags

500

This is the maximum distance between standard spray sprinklers in light hazard settings. 

What is 15 ft. 

500

All means of egress must remain this. 

unobstructed or unblocked

500

This is the most common safety device that uses a photoelectric system that use beams of fluorescent or infrared light to create invisible barriers around a machines perimeter and in front of it's points of operation.

what is light curtains

500

 this is one of the worst things to drink in the heat. 

What is caffeinated drinks or sugary drinks, or alcohol

500

This can be found on all equipment and tells all employees  the purpose of the procedure, and the critical importance of not attempting to start up or use equipment that has been locked out or tagged out.

What is an Energy Control Procedure