Pubs & Regs
What is the title of 14 CFR Part 43?
What is Maintenance, Preventative Maintenance, Rebuilding, and Alteration
What type of hose is used to connect stationary parts to movable parts where it is subject to high vibration?
Flexible hose assemblies
Always approach Helicopters __________________________.
In view of the pilot
From the rear
In view of the crew chief
In view of the pilot
Where do you find information on Airworthiness standards for normal category Airplanes.
CFR 14 Part 28
CFR 14 Part 23
CFR 14 Part 25
CFR 14 Part 23
A double flare is useful for?
A better seal
Easy removal
Makes the need of fittings unnecessary
A better seal
What FAR would you read to find out what TCDS stands for?
What is 14 CFR Part 1.
What is the advantage of using Teflon hose in aircraft fluid systems?
It is compatible with most fluids used in aircraft fluid systems
After engines are running and you first begin to taxi, you should:
test the brakes.
look at bleed air pressure gauge
call ground control to check the weather
test the brakes
May an A&P mechanic supervise an unlicensed mechanic and return to service a powerplant minor repair?
Yes
The two kinds of flares generally used in aircraft tubing are _____ flare and _____ flare.
Double, Split
Single, Double
Double, Triple
Single, Double
What FAR part covers the registration number of US registered aircraft?
What is 14 CFR Part 45
A flared tube fitting consists of?
Sleeve and nut
What are the inherent characteristics of aviation gasoline?
high heat value, high volatility.
extremely high heat value, low toxicity.
burns bright white, produces no smoke
high heat value, high volatility.
What form is used for aircraft registration?
Registration is accomplished by filling out FAA Form 8050-1
Registration is only required for legal use of the airplane
The Faa must first inspect and grant a feild approval
Registration is accomplished by filling out FAA Form 8050-1
What shape would be found on a lubrication identification line?
Rectangles
Triangle
Squares
Squares
__________ refer to a type of publication offered by the FAA to provide guidance.
Advisory Circulars
Scratches & nicks no deeper than 10% of the wall thickness may be repaired, unless in the _____ of a bend
Heel
What does “SDS” stand for?
Safety Data Sheets
What are the types of manufacturers manuals?
Operating instructions, and maintenance manuals
Airworthiness certificate, airworthiness directives
Service bulletins
Operating instructions, and maintenance manuals
__________ describes the deep, permanent impressions in a flexible hose.
Cold Flow
Hot flow
Constant fluid
Cold Flow
Temporary records must be kept.
By the owner until the work is repeated, superseded, or 1 year has transpired since the work was performed.
By the owner until the work is repeated, superseded, or 2 years has transpired since thework was performed.
For 2 years.
By the owner until the work is repeated, superseded, or 1 year has transpired since the work was performed.
Standard AN fittings are identified by their _____ or _____ color.
Black, Blue
If the fuel being used does not vaporize readily enough, it can cause:
vapor lock.
detonation.
hard starting.
hard starting.
Which rating is required to approve an aircraft for return to service after an airframe major repair?
A&P/IA
Which of the following two is true?
1) Although the use of flareless fittings eliminates flaring the tubing, another
operation, referred to as presetting, IS necessary prior to installation of new
flareless fittings.
2) Although the use of flareless fittings eliminates flaring the tubing, another
operation, referred to as presetting, ISNT necessary prior to installation of new
flaress fittings.
1 is true.