Hand Tools
Use to cut metal
Hacksaw
The speed a drill rotates
What is RPM
What is the main purpose of a lathe?
What is to make a round part.
Brand name of a milling machine
Bridgeport
This use to check a grinding wheel for cracks.
What is a ring test.
This tool is used to mark the center fo a hole.
What is a center punch.
This is the included angle on a general purpose drill.
What is 118 degress.
The part of the lathe that houses the spindle gears.
What is the headstock.
This is the direction the cutter must rotate.
What is clockwise.
Grinder used to sharpen drills, and lathe tools.
What is the Pedestal Grinder.
Large plastic hammer with shot BBs inside.
What is a dead blow hammer.
This is the center section of a drill bit that gets thicker toward the shank of the drill.
What is the web.
Lever used when threading
Half Nut
To check the milling head is square or perpendicular to the table.
What is tramming the head.
This tool is used to make the grinder wheel sharp on the pedestal grinder.
What is a mechanical or star dresser.
Used to remove burrs, and are made in different shapes, and have a tang.
What are files.
This drill press is used for larger work.
What is a Radial Drill Press
Used to produce a diamond pattern on a part.
What is a knurling tool.
The two names or ways that a milling cutter can mill depending on which side of the part you start from.
What is conventional or climb milling.
This tool is used to true and dress the grinding wheel on a surface grinder.
What is a Diamond Dresser.
Tool used to scribe a radius or circle.
What is a divider.
The decimal size of a 7/8" drill.
What is .875
Each line on the cross slide hand wheel is equal to.
What is one thousandth (.001) of an inch.
The RPM formula for cutter speed.
What is RPM = Cutting Speed X 4 / Diameter
This grinder makes parts flat and uses a magnet to hold the part.
Wat is a Precision Surface Grinder.