Final pressure test of a medical gas system is for a ____ duration?
24 hour
Where sleeves are installed for a fire-resistance-rated assembly, they___
Should be securely fastened to the rated assembly
All valves, including the three-way valve, shall be ___
Accessible
Rainwater catchment systems intended to supply uses such as dishwashers shall be
Prohibited
In chapter 15 what section does it talk about Surge Tanks.
1502.9.1
Copper to copper joints shall be ____+
Brazed
_____piping shall not connect to noncombustible piping unless it can be demonstrated that the transition is in accordance with this chapter
Combustible
The distance between a septic tank and a gray water disposal field shall be ?
5 Feet
Rainwater catchment tanks shall be marked ___
NONPOTABLE RAINWATER
Ch. 13 what section?
Piping shall be protected against freezing, corrosion, and physical damage.
1310.3
The initial test of medical gas piping requires a minimum test pressure of _____ psi.
150 psi
Who shall determine the type, size, and quantity of penetrations to be inspected?
AHJ
All valves shall be equipped with locking feature except for ?
fixture supply control valves
Rainwater shall be collected from ____
roof surfaces
What chapter talks about Alternate Water Sources For Nonpotable Applications?
Chapter 15
In Ch. 13 where does it talk about Emergency Shutoff Valves?
1312.1.3
What section talks about insulation and coverings?
1404.5
What section does it talk about Maintenance Responsibility?
1501.5.3
Where does it say primary and secondary roof drains, conductors, leaders, and gutters shall be designed and installed in accordance with this code.
1602.9.7
What section in Ch 16.?
System components shall be properly identified as to the manufacturer.
1601.4 Component Identification
What section?
Zone valves shall be readily operable from a standing position in the corridor on the same floor they serve.
1312.6.1
What section?
Construction documents shall indicate with sufficient detail how penetrations of fire-resistance-rated assemblies shall be firestopped prior to obtaining design approval
1402.1
What section?
A backwater valve shall be installed on gray water drain connections to the sanitary drain or sewer.
1502.9.7
What section?
Tanks and piping installed in locations subject to freezing shall be provided with an approved means of freeze protection.
1602.9.9
What chapter and section?
In the event that a cross-connection is discovered, the following procedure, in the presence of the AHJ, shall be activated immediately.
Chapter 16 1602.11.2.3 Discovery of Cross-Connection