H&P
LIFEBELT OF THE MONTH
safety operated all vehicles(DRIVE SAFETY)
What is the focus of PSMS?
To eliminate Life Altering Injury
Failure to keep the hole full of mud while tripping can cause this.
a kick
What is the kick off point?
is where the well deviates from vertical
what size is our flow line?
12 inch
What is C.O.A.C.H
care, observe, approach, converse, help
HOW MANY LSRA'S MAKE UP PSMS? MENTION 5
12
breaking containment
bypassing safety controls
confined space entry
driving
energy isolation
excavation
hot work
line of fire
safe mechanical lifting
working around mobile equipment
work authorization
working at height
Which gas do you use to pre-charge the accumulator bottles on a BOP hydraulic control unit?
Nitrogen
What is EDS on an oil rig?
emergency disconnect system/sequence
How many tong die cylinders does the Hexgrip have?
12
what are the H&P core values?
actively care
service attitude
innovative spirit
teamwork
do the right thing
WHAT IS LMRA
WHAT ARE THE 3 STEPS
LAST MINUTE RISK ASSESSMENT
stop
think
act
Primary- drilling fluids
Secondary- BOPs, well head, casing, cement
What is the name of the component that protects a system from over pressurization?
pressure relief valve
What is the TDS Hydraulic fluid Reservoir Capacity?
25 gals
what are the four e-permits available electronically on esafe?
lo/to/to
hot work
confined space entry
overhead tool checklist
IN THE SAFETY IN THE MOMENT FLOW CHART WHEN DO WE STOP WORK AND DISCUSS
WHEN WE ENCOUNTER HOLD POINT OR TRIGGER
How many nitrogen bottles are on the accumulator and how many total gallons are required to close ALL the BOPs?
16 Bottles
41.58 gals total
23.58 gals annular
5.8 gals rams (each)
0.6 gals HCR
What is the Christmas tree on an oil well?
a piece of equipment that provides flow control on a oil or gas well. Christmas trees are a vertical assembly of valves with gauges and chokes that allow for adjustments in flow control as well as injections to stimulate production
What is the shaker system?
This is the primary method of removing solids from the mud
In a lockout/tagout procedure, who are the affected employees
those who operate or use the machine or equipment being serviced, or whose work requires them to be in the area where the service or maintenance is being performed
WHAT IS THE RULE FOR LSRA WORKING AT HEIGHT
PROTECT YOURSELF AGAINST A FALL WHEN WORKING AT HEIGHT
Explain Well Shut-in Procedure While Drilling (Hard Shut-in)
a. Stop Drilling and Space out DP
b. Stop pumping & Rotation
c. Confirm well flowing
d. If flow is detected, initiate shut-in procedure
e. Sound the kick alarm
f. Open the Choke line valve (HCR Valve)
g. Close the Upper Pipe Rams or Annular Preventer
h. Verify Choke is closed
i. Record SIDPP & SICP at a specified interval
j. Record Pit gain
Which US governmental agency is responsible for worker safety in the oil and gas industry?
OSHA (Occupational Safety and Health Administration)
WHAT SIZE ARE THE 4 MAIN CENTRIFUGAL PUMPS ON THE RIG?.
1 IN X 1.5 IN X 8.5 IN
3 IN SUCTION x 2 IN DISCHARGE x 13 IN
4 IN SUCTION x 3 IN DISCHARGE x 13 IN
8 IN SUCTION x 6 IN DISCHARGE x 14 IN