Category 1
What is the Max Height of the 60K?
222 inches or 18.5 feet
What is the temperature range the 60K can work in?
-40 to +126 degrees F.
What is the max speed of the 60K?
20mph
What is the turn radius of the 60K?
50ft, 90 degrees.
How many pallets can the 60K hold and what is the max weight of each pallet position?
6 pallets at 10,000 lbs each.
What is the max weight the 60K can hold for rolling stock and what is the weight for each axel?
60,000 lbs. One axel 13,000lbs. Two axels 30,000lbs.
What is the normal height of the deck when it is normal height (travel mode).?
46 in.
How many gallons does the fuel tank (engine) hold? How many gallons does the fuel tank (heater) hold?
50 gal. 1.5 gal.
How many qts does the engine oil tank hold? (Mercedes) and (Detroit Diesel)
Mercedes: 30.5 qts. Detroit Diesel: 16 qts
What are the levels of hydraulic fluid for operating level, tank capacity, and system capacity of the hydraulic tank?
Operating level: 62 gal. Tank capacity: 78 gal. System capacity: 150 gal.
What does the override button on the suspension panel do?
Lowers the 60K down to 39 in to work a C-130 aircraft.
What does the left side hydraulic pump operate?
Detroit Diesel
Axel line 4, steering, side shift & roll, and power conveyers.
What does the right side hydraulic pump operate?
Detroit Diesel
Axel line 2, suspension, and lift linkage.
What is the temperature range for DF-1, DF-2, and DF-A?
DF-1: -32 to +32. DF-2: +32 or above. DF-A: -32 or less.
How many rings are on the deck and catwalk of the 60K?
20 on deck and 20 on catwalk.
What are the 7 major components?
Chassis, Suspension, Engine, Ladder, Lift Linkage, Lift cylinder, Deck, Cab, Handrail, Catwalk, and Deck Extension.
What are the three major systems that make up the operational features of the loader?
What are the 8 systems of the hydraulic systems?
(Detroit Diesel) and (Mercedes)
DD: Emergency hydraulic system, steering, side shift and roll, power conveyors, lift linkage, hydrostatic drive, suspension, and cooling.
Mercedes: Emergency hydraulic system is the same as Detroit Diesel and consists of: steering, side shift and roll, power conveyors, lift linkage, hydraulic drive, suspension, and cooling.
What systems does the Pneumatic System consist of?
Charging, primary, secondary, and emergency subsystems.
Have one person on team demonstrate the following spotter signals.
-Roll Left side up
-Pitch back down
-Back up
Teacher will say correct or wrong.
What are the major components of the Electrical system and the name?
A14 battery box, A12 module (winterization), A6 module (engine) *Series 53 Diesel only*, A1 module (chassis), A16 module (emergency power unit circuit breaker box), A19 module (12/24 vdc circuit breaker box), A20 module (24vdc starter circuit breaker box), and A22 module *Detroit Diesel* (engine shutdown control).
Auxiliary Control Panel, Cab Heater Panel, Indicator Light Panel, Meter Gage Panel, Suspension Mode Control Panel, Ignition and Mode Control Panel, and Deck Indicator Panel.
What is the Crossover Switch used for and which engine has this function?
Two position switch, which in case of hydraulic pump failure, allows pump flow to cross over to supply lift/suspension or deck/steering circuits. On Detroit Diesel Engine only.
What does the suspension load override allow the operator to do?
Deck can be raised or lowered with chassis suspension in any position.
1.What should your oil pressure range be for both engines?
2.What should your battery (12vdc) and (24vdc) range be?
3.What range should your air pressure be?
1. Detroit Diesel: 5-80psi. Mercedes: 7-100psi.
2. 12vdc 12-15, 24vdc 24-29
3. Air pressure 70-120psi