WZ MARKING SIGNS
THIS SIGN MIGHT BE 'EDGY"
NO EDGE LINES
THIS 'CLASS' OF MARKINGS IS FOR SHORT TERM USE
CLASS II
WORK ZONE MARKING SIGN
EACH
USED TO DOCUMENT THE WORK ZONE
GO FORMZ 614 MAINTAINING TRAFFIC INSPECTIONS QUALITY CHECKLIST
DAILY WORK REPORT
EQUIPMENT SHOULD BE STORED THIS FAR BEHIND GUARDRAIL
6 FEET
NOTE - CABLE BARRIER IS EXCLUDED AS A MEANS OF PROTECTING DRIVERS FROM STORED ITEMS
THIS SIGN WILL NOT "PASS"
DO NOT PASS
MARKINGS NOT IN USE OR ONES THAT CAUSE CONFUSION TO THE DRIVER
CONFLICTING MARKINGS
DETOUR SIGNING
DETOUR SIGNING LUMP SUM ITEM
FULL ROAD CLOSURE WITH DETOUR
INSPECTION PRIORITY -2
DOCUMENT PRIORITY-2
FREQUENCY MODIFIED TO ONCE WEEKLY BY PROJECT STAFF
RESPONSIBLE PARTY FOR FILLING POTHOLES IN AN ACTIVE WORK ZONE
CONTRACTOR
THIS SIGN "CARES"
PASS WITH CARE
THIS 'CLASS' OF MARKINGS IS USED WHEN PERMANENT THERMOPLASTIC MARKINGS ARE TO BE APPLIED
CLASS III
GROOVED PAVEMENT SIGN
INCLUDED IN LUMP SUM MOT
LONG TERM WORKZONE (72 HRS. +) WITH PORTABLE BARRIER AND/OR DRUMS
INSPECTION PRIORITY -2
DOCUMENT PRIORITY-2
FREQUENCY MODIFIED TO TWICE WEEKLY BY PROJECT STAFF
THIS DEVICE CAN BE USED IN LIEU OF FLAGGERS
AFADs (AUTOMATED FLAGGER ASSITANCE DEVICES) SS 830 & ENGINEER APPROVAL
THIS SIGN IS NOT PAID AS A WZ MARKING SIGN
GROOVED PAVEMENT
TIMEFRAME WHEN CLASS II MARKINGS NEED TO BE REPLACED
14 CALENDAR DAYS
TRUCK MOUNTED OR TRAILER MOUNTED ATTENUATOR
INCLUDED IN LUMP SUM MOT
NEW WORK ZONE SETUPS
INSPECTION PRIORITY -2
DOCUMENT PRIORITY-2
FREQUENCY MODIFIED TO WITHIN 24 HRS (ASAP) BY PROJECT STAFF
THIS TYPE OF LIGHT IS ON A ROAD CLOSED TYPE III BARRICADE
TYPE B (BLINKS 24/7)
SIGNS TO BE PLACED AT LEAST ONCE EVERY _ MILES
2 MILES
TIMEFRAME WHEN 'NO-PASSING' ZONES NEED TO BE RE-ESTABLISHED BY CLASS I MARKINGS
3 CALENDAR DAYS
DSL ASSEMBLY
SIGN MONTH - 30 DAY PERIOD THAT STARTS ON INITAL DAY OF ACTIVATION (SS 808.06)
TIMEFRAME FOR INSPECTIONS DURING THE "OPPOSITE WORK CYCLE"
MONTHLY
IF PROJECT IS NORMALLY INSPECTED DURING THE DAYLIGHT HOURS WOULD ALSO BE INSPECTED ONCE A MONTH DURING NON-DAYLIGHT HOURS
THIS IS REQUIRED WHEN WORKING ON A MULTI-LANE HWY (45mph +) IN A CLOSED LANE/SHOULDER WITHOUT A TRAFFIC BARRIER
TRUCK-MOUNTED OR TRAILER ATTENUATOR (TMA) 614.03D