Tools
This tool is used to drive nails into timber.
Hammer
These must be worn to protect your eyes when using soldering irons
Convert 2cm to millimetres
20mm
This finishing technique involves removing small imperfections with progressively finer abrasive material.
Sanding
This country has the largest population in the world.
China
This saw is used to cut the timber packers in our project
Tenon saw
This is the minimum footwear requirement in the workshop.
Fully enclosed, leather shoes
Convert 87 mm to centimetres.
8.7cm
This clear coating is often used to protect and shine timber.
Lacquer or varnish
This natural resource is used to make glass.
Sand
This tool checks if an angle is exactly 90 degrees.
Tri-square
This rule means “Stay away and don’t distract someone while they are using machinery"
Safety zones
How many pieces of timber in total were used to construct your box?
10
The lines or patterns seen on the surface of timber are called this.
This planet is known for its beautiful rings.
Saturn
This tool holds timber steady while sawing and protects both the bench and the user’s hand
Bench hook
Before turning on a machine, you must always ensure that this is removed/out of the way
Long sleeves, necklaces, apron ties, hair
What was the measurement of where you had to draw the lines for the sides of the box?
6mm
This defect looks like a hole or missing patch where branches once grew.
A knot
This continent has the most countries
Africa
This tool is designed to pull nails out of timber by gripping the head and rocking back on rounded jaws.
Pincers
This coloured button or switch will immediately stop a machine during an emergency.
Emergency stop button
How many nails were you supposed to use in total for your project?
28
This type of manufactured board is made by gluing thin layers of timber together.
Plywood
This metal is liquid at room temperature.
Mercury