Safety
When a work station has a compressed gas cylinder it should be
What is chained to a rigid structure to keep from falling over
What does TPM stand for and what is its goal?
What is Total Productive Maintenance and zero breakdowns and defects
In a PM audit, the ______ would likely be negatively impacted if there were a large number of uncompleted PM work orders
Critical Path
3 examples of shaft to adjacent shaft power transmission
What is Chain Drive, Belt Drive, and Gear Drive
If a motor has an excessive load what happens?
a fuse blows or an overload trips
When working with sharp or rough metal, a sheet metal worker should
What is wear gloves and safety glasses
What is an example of preventive maintenance?
What is scheduled replacement of minor parts that wear out quickly
anyone in a plant should be able to find the right tool for the job in..........
30 Seconds
what should you do to all machine components before coupling them together?
What is Level them
What does DCV stand for?
What is Directional Control Valve
The osha’s workers right to know refers to
What is the osha hazardous communication standard
a maintenance log should be kept for....
What is every machine
what is an accelerometer used for?
What is Vibration Monitoring
what is a common material for tubing in high pressure hydraulic service?
What is Stainless Steel
what kind of fault is most likely to occur in a robotic system?
What is sensor/actuator interface
Documentation of daily fork lift safety inspections is required by
What is OHSA
Preventive maintenances schedules would commonly include
What is Frequency
A Viscometer is a device used for measuring the viscosity of an oil, and is generally _______ accurate.
What is 95-99%
when temperature decreases, the viscosity of a liquid ___.
Increases Slightly
In sequencing, what are time-delay relays used in place of?
What are Limit Switches
What is the most useful aspect of Predictive Maintenance?
What is Sensor Monitoring
What is most closely associated with the repair of broken parts?
Breakdown Maintenance
to assure proper alignment of motors with mating equipment, the first step is to
check shaft runout
what causes soft foot?
Uneven Mounting Surfaces
If a Tech has unwired a motor from a disconnect, and the circuit breaker still trips, the next logical step is to
replace the circuit breaker and see if the breaker trips again