Cx
Client's see value when you set up a face to face meeting with a __________
Subject Matter Expert (SME)
Regulatory Compliance-subservice where you test the air is called __________________
Air Quality/Permitting
Facilities-service where you evaluate a property's compliance with applicable federal, state, and local accessibility regulations is called _________________
ADA/Accessibility Assessments
Geotech-service where you perform settlement monitoring, lateral displacement monitoring, vibration monitoring or crack monitoring is _________________
Instrumentation (PDA, TIP, PIT, CSL, Vibration Monitoring, Inclinometers, etc.)
MAT-service where you inspect a project to ensure compliance with code and the approved construction documents is called _________________
Special Inspections
One week after submitting a _____________ to a client, the CD Pro should call and check on status.
Proposal
Regulatory Compliance-subservice to comply with Superfund Amendments Reauthorization Act (SARA) and the Emergency Planning and Community Right to Know Act (EPCRA) is regulated by what agency?
OSHA
Facilities-service where you perform lifecycle planning to create a framework for the complete cradle-to-grave oversight where you acquire, operate, maintain, renew, and retire assets is called _________________
Facility Asset Management
Geotech-service where you evaluate the ground beneath a site is called _________________
Geotechnical Engineering Analysis/Consulting/ Reporting
MAT-service where you observe a project with a retaining wall and soil reinforcement elements is called _________________
Mechanically Stabilized Earth (MSE) Observation
If you attend a conference on behalf of Terracon you should identify a list of ______________ who you can connect with in the evening.
Clients
Regulatory Compliance-subservice where you evaluate conformance with relevant federal, state, and local regulations is called __________________
Limited Environmental Compliance Assessment (LECA)
Facilities-service where you perform peer review of design documents and contractor submittals to evaluate enclosure systems is called ______________
Building Enclosure Consulting (BECx)
Geotech-service where you evaluate the pavement based upon surveys and arrive at a pavement condition index (PCI) is called _________________
Pavement Evaluation
MAT-service where you observe installation of material around openings that is needed to prevent the spread of fire through the different compartments of a building is called _________________
Firestopping Observation
Writing a hand written note to a client after meeting with them should be done within __________
2 days
Regulatory Compliance-subservice where you prepare a plan for Spill Prevention as a preventative measure that protects life, the environment, and businesses is called __________________
Spill Prevention (SPCCs/AST/UST) permitting
Facilities-service where you field test mock-up installations (walls/windows/roofs) is called _________
Building Enclosure Consulting (BECx)
Geotech-service where you evaluate the failing slope of a site is called _________________
Specialty Evaluation (Finite Element Method, Complex Slope Stability, Forensics, etc.)
MAT-service where you collect a sample and cast in a cylinder and cure for a period of time. Then each cylinder is tested for compressive strength and this is called _________________
Concrete Testing
A business development meeting should have the following topics every other week:
1) Client Pursuits, 2) ________________ and 3) Events
Project Pursuits
Regulatory Compliance-subservice for construction projects requiring permit coverage include activities that disturb one acre or more of land through: clearing; grading; excavating, or stockpiling of fill material. The plan is called _______________
Stormwater Pollution Prevention Plans (SWPPPs)
Facilities-service where construction lenders hire us to review pay requests and perform draw inspections is called _________
Construction Consulting Services
Geotech-service where you engineer a wall to retain soil or rock on a site is called _________________
Retaining Structures
MAT-service where you verify the erection of a structure is in accordance with the drawings and to check for plumbness, rectangularity, field welds and bolt tensioning is called _________________
Structural Steel Inspections