Fall protection/ fall prevention
Lead/asbestos
general orders/track safety
Accident reporting and recordkeeping
electrical safety, powerlines, high tension
100

When must the worker be attached to an anchor point?

Working at height above 6 feet

100

Describe some precautions taken with lead? Asbestos?

Must have an approved lead placard to preform lead disturbing activities 

Lead inspector should be on site 

All workers performing need to have lead Awareness training


100

What is the general order and what information does a general order provide?

General order is when NYCT divert/close train traffic to the public to facilitate construction

The documents provide information on work limits, who will be performing the work date and time

100

When is notification of an incident made? And by whom?

Contractor safety manager sends out a tier notification to the PMC and PCEO and the PCEO will forward depending on the severity of the incident

100

Explain lockout tag out procedures

HAZCOM program, fire prevention, PPE, safety procedures, EPR, site, specific hazards and safe working methods 

200

how does fall protection differ from fall prevention?

They use barriers to prevent falls

200

if asbestos material is encountered what shall be done?

Work must be stopped And the asbestos material shall be inspected

200

What shall a safety manager/coordinator do before starting a GO shift?

track safety verification checklist

200

What is an OSHA reportable incident?

An OSHA reportable incident refers to workplace incidents that are considered serious injuries

200

What is the minimum safe distance from conductors when cranes and derricks are working near high tension lines? 

20 feet

300

How much weight must a secure anchor point withstand? 

5000lbs or greater for each person connected 

300

Why is it important to have face-to-face evaluation of employees

To perform fitness for duty assessment

300

What must the safe Manager/coordinator discuss during a GO safety briefing? 

Discuss fitness for duty

Discuss who the engineer in charge is 

New issues or safety advisors

Review Specific safe work plans

Any unusual hazard/Conditions

300

What is the timeline for an OSHA reportable incident?

A fertility must be reported within eight hours 

While serious injury shall be reported Within 24 hours

You can call the nearest OSHA or report online

300

What information is recorded in the permit logbook?

Permit description & number, issue date & expiration date

400

What steps should be taken when workers are exposed to fallen objects?

Barricade the area where objects will fall, stop employees from entering the barricade area and keep objects away from the edge so they don’t potentially fall

400

How do you conduct fitness for duty?

Have conversations with workers before start of shift observing behaviors and physical appearance

400

What is a test train?

Test trains are requested prior to restoring tracks to regular service

A test train is used to determine if there are any obstructions or objects That may hinder the safety of the public During regular train use 

400

What paperwork should be submitted by the contractor in the event of a work related injury or illness

Construction incident report And a C2 F workers compensation form

400

What ID and proof of qualification Must a contractor employee carry while on a NYCT property?

OSHA 30hr training for construction 

500

When is personal fall protection required?

Above 6 feet 

For excavation 

500

When having face-to-face evaluations, what proper PPE needs to be worn

Vest 

Hardhat

Safety glasses

Toe steal boots

500

What is the blue white location? And what is the purpose of the equipment being located there?

Blue light locations are at the end of station and at every 600 feet between also where every emergency telephone and alarm box is located 

500

What is OSHA300 and OSHA300A

OSHA 300 is a Detailed log where employers Record specific details About work, related injuries or illnesses 

OSHA300A is an annual summary of all work related injuries that is logged throughout the year
500

When is PPE beyond the basic NYCT PPE required? 

Face shield for grinding,chipping, chopping, 

chaps for chainsaws

Welding shield for welding operations 

Cut level five gloves for handling sharp objects