Compliance
Compliance is required within this many days after the effective date of Amendment 39-5414
What is 60 days?
This kind of inspection is used to inspect the internal, inboard radius area of the clamp, especially next to the clamp bolt hole, for corrosion
What is visual inspection?
When Propeller blade clamps do not have matching or readable serial numbers, this should be done.
What is Replace with clamps with matching serial numbers?
Aircraft may be ______ in accordance with the provisions of Federal Aviation Regulations 21.197 and 21.199 to a base where the AD can be accomplished.
What is Ferried?
This kind of inspection is used to inspect all internal and external surfaces of the clamp for evidence of cracks in accordance with Hartzell Specification No. H-S-7 dated August 4, 1981
What is Magnetic particle inspection or MPI?
This AD must be complied with at ____ inspections
What is 100 hours?
Upon request, an equivalent means of compliance with the requirements of this AD may be approved by the...
What is the FAA?
This kind of inspection is used on all external surfaces of the blade clamp assemblies within 100 hours since previous inspections.
What is Penetrant inspection?
The location of Hartzell Propeller Inc. HQ
What is Piqua, Ohio?
Compliance with this amendment constitutes compliance with this AD
Amendment 39-5098
The following must be accomplished on all blade clamp assemblies which have serial numbers ranging from
What is D5294 through K6336?
The effective date of this AD.
September 25, 1986
When a clamp is found with this on it, it must be removed.
What is corrosion?
This type of inspection is used to inspect the propeller blade clamp for evidence of cracks
What is Magnetic Particle Inspection?
What is the 28th week?