Safety
What is the worst way to receive an electrical shock?
Hand to Hand
What is the proper name for a jig saw?
Saber Saw
What type of material is SE cable made of?
Aluminum
What needs to be installer with in 12 feet of an outside air-conditioning unit?
GFCI
What is the Code cycle?
Every three years
What does water do to your bodies resistance?
Lowers
What is the most commonly used tool that electricians use to strip wire?
T-Stripper
What is larger in diameter solid or stranded?
Stranded
How many convince receptacles can be installed per the NEC for a 20 amp circuit?
10
What is considered a continuous load?
3 or more hours
When working on a jobsite what is required for all extension cords?
GFCI protection
I have the ability to cut and strip wire. I also can crimp and trim bolts.
Multi purpose tool
When dealing with AWG the smaller the number the
Smaller the wire
What is the height requirement for a service head over a grass area that receives no vehicle traffic?
10 feet
What does the NEC consider assessable?
Able to be accessed without damage to the building
When working on electrical equipment all equipment must be considered ?
Live until you meter it.
This tool is used when pulling wire through walls and conduits.
Fish Tape
What is larger 1/0 or 3/0?
3\0
What is the reason we bond and ground our electrical systems?
To provide a safe path for electrical circuits to ground if a fault accrues
What article is the NEC based on?
Article 90
How far from 50k powerlines do you need to maintain when working in a MEWP?
10 feet
What type of electrical meter has the abilities to deterring the range of voltage you are testing?
Auto ranging
What type of insolation in on service entrance conductors?
XHHW or type 2
Fuses breakers are considered?
Overcurrent protection
Per NEC requirements how far apart must your type NM cable be supported?
4.5 Feet