Operations Management
VS and VSL STAND FOR THIS.
WHAT ARE
VALUE STREAM & VALUE STREAM LEADER
ASSEMBLIES ARE IDENTIFIED BY BN AND PN, WHICH STANDS FOR THESE
WHAT ARE
BODY NUMBER AND PART NUMBER
AQL IS THE FREQUENCY AT WHICH PARTS SHOULD BE INSPECTED. AQL STANDS FOR THIS
WHAT IS
ACCEPTABLE QUALITY LEVEL
SORT, STRAIGHTEN, SHINE, STANDARDIZE, SUSTAIN & SAFETY ARE KNOWN AS THIS
WHAT IS
6S
WE HAVE THREE MAIN TYPES OF ENGINEERS IN THE FACILITY; MANUFACTURING ENGINEER, DESIGN ENGINEER & QUALITY ENGINEER. THESE ARE THE ACRONYMS WE USE FOR THEM.
WHAT ARE
ME, DE & QE
OEM STANDS FOR THIS.
WHAT IS
ORIGINAL EQUIPMENT MANUFACTURER
A ROUTER OR CC CONTAINS PROCESSING STEPS AND QUALITY REQUIREMENTS FOR THE MANUFACTURING OF PARTS. A CC IS
WHAT IS A
COMP CARD
ALL OF AEROSPACE, INCLUDING AATECH IS REGULATED BY THE FAA, WHICH STANDS FOR
WHAT IS
THE FEDERAL AVIATION ADMINISTRATION
OSHA IS AN EXTERNAL SAFETY ADMINISTRATION. OSHA STANDS FOR WHAT
WHAT IS
OCCUPATION SAFETY & HEALTH ADMINISTRATION
FETT AND SETT ARE TERMS FOR SPECIAL ENGINE SETS MADE FOR TESTING. THESE ACRONYMS STAND FOR
WHAT IS
1st ENGINE TO TEST & 2nd ENGINE TO TEST
OUR CUSTOMER SERVICE IS MEASURED BY OTD, WHICH STANDS FOR
WHAT IS
ON TIME DELIVERY
A TMD CONTAINS SPECIFIC OPERATION INSTRUCTIONS. THIS IS WHAT TMD STANDS FOR
WHAT IS
A TEXT MANUFACTURING DOCUMENT
NDT IS A FORM OF TESTING ALL NOZZLES GO THROUGH. WHAT NDT STANDS FOR IS
WHAT IS
NON-DESTRUCTIVE TESTING
OUR INTERNAL SAFETY GROUP IS CALLED EHS, WHICH STANDS FOR
WHAT IS
ENVIRONMENTAL HEATH & SAFETY
A PECO IS SOMETHING ENGINEERING HAS TO WRITE IN ORDER TO MAKE A PROCESSING OR DRAWING CHANGE. THIS IS WHAT PECO STANDS FOR
WHAT IS
PROCESS ENGINEERING CHANGE ORDER
FTY IS A MEASUREMENT OF HOW WELL WE CAN MAKE PARTS. THIS IS WHAT FTY STANDS FOR
WHAT IS
FIRST TIME YIELD
ASSEMBLIES ARE TESTED ACCORDING TO REQUIREMENTS DOCUEMTNED ON A PTS. PTS STANDS FOR THIS
WHAT IS
PRODUCTION TEST SPECIFICATION
IF A PART DOESN'T MEET QUALITY REQUIREMENTS IT IS PUT ON AN MDR. MDR STANDS FOR
WHAT IS
MATERIAL DISPOSITION REPORT
AN SDS IS WHERE YOU WILL FIND IMPORTANT INFORMATON ABOUT A SPECIFIC CHEMICAL. SDS IS AN ACRONYM FOR WHAT
WHAT IS A
SAFETY DATA SHEET
RG'S ARE PARTS RETURNED FROM THE CUSTOMER THAT USUALLY REQUIRE SPECIAL PROCESSING AND ENGINEERING ATTENTION. RG IS THE ACRONYM FOR THIS
WHAT IS
RETURNED GOOD
S&OP IS THE PLANNING TOOL USED TO DETERMINE DAILY, WEEKLY AND MONTHLY BUILD PLANS. S&OP STANDS FOR THIS
WHAT IS
SALES & OPERATING PLANNING
SPC IS A QUALITY TOOL USED TO EVALUATE AND MONITOR DATA AT CETAIN OPERATIONS. SPC STANDS FOR THIS
WHAT IS
STATISTICAL PROCESS CONTROL
WE HAVE A STRICT FOOD AND DRINK POLICY FOR THE SHOP FLOOR BECAUSE OF RISK OF FOD. FOD IS AN ACRONYM FOR WHAT
WHAT IS
FOREIGN OBJECT DEBRIS
WIP, TAKT, AND FIFO ARE LEAN MANUFACTURING TERMS THAT STAND FOR THESE
WHAT IS
WORK IN PROGRESS, TIMED MEASUREMENT OF PRODUCTION OUTPUT & FIRST IN FIRST OUT
RTV AND DNAEI ARE TWO DIFFERENT TYPES OF CATEGORIES AN ENGINEER CAN IDENTIFY A PART AS IF IT DOES NOT PASS INSPECTION. RTV AND DNAEI STAND FOR THESE
WHAT IS
RETURN TO VENDOR & DOES NOT AFFECT END ITEM