Show:
ADAS
Vehicle Design
Exterior Panels
Exterior Panels 2
Tools, Hardware, and Trim
100

ADAS for vehicle safety includes all of the following EXCEPT: 

  • A. Lane departure warning. 

  • B. Collision mitigation. 

  • C. Parking assist. 

  • D. Blind spot warning. 

C

100

A magnet will stick to which type of material?  

  • A. Ferrous metal  

  • B. Carbon fiber  

  • C. Aluminum 

  •  D. Magnesium 

A

100

Intrusion beams are made from mild steel.  

  • A. True  

  • B. False 

B

100

If the vehicle-maker service information does not provide panel gap dimensions, make sure that the gaps match the other side of the vehicle. 

  • A. True. 

  • B. False  

A

100

Screws can be tightened by turning the screwdriver counterclockwise and removed by turning the screwdriver clockwise. 

  • A. True  

  • B. False 

B

200

Which part has two shafts that are designed to collapse during a collision? 

  • A.  Clock spring 

  • B.   Impact sensor 

  • C.   Collapsible steering column 

  • D.   Roll bar Supplemental  

C

200

All of the following are a type of steel EXCEPT: 

  • A. Ultra-high-strength. 

  • B. High-strength. 

  • C. Boron-alloyed. 

  • D. Ultra-mild.

D

200

All of the following are closure panels EXCEPT:  

  • A. Fuel or EV charging port door.  

  • B. Bumper cover.  

  • C. Hood.  

  • D. Liftgate. 

B

200

When performing a hood alignment, the latch may need to be adjusted to ensure a smooth closing. 

  • A. True 

  • B. False 

A

200

What type of socket is characterized by a 6-point, star-shaped pattern?  

  • A. Oxygen sensor  

  • B. Flex joint  

  • C. Torx®  

  • D. Lug nut 

C

300

The restraints   control module ( RCM)  performs all of the following functions EXCEPT: 

  • A. Checks for system faults. 

  • B. Gathers data to determine if any airbag deployment is necessary and which restraint is deployed. 

  • C. Sends a signal to the igniter to trigger the airbag inflator. 

  • D.   Determines if the seatbelts are being used. 

D

300

Collision energy management is:  

  • A.   Limited to the areas that only use high-strength steel.  

  • B.   One object striking another with equal and opposite force.  

  • C.   Structural design to absorb and transfer collision energy.  

  • D.   Only present in the center section of a vehicle. 

C

300

Types of bolt-on stationary panels include all of the following EXCEPT: 

  • A.  Quarter panels. 

  • B.  Rocker panels. 

  • C.  Fenders.  

  • D.  Hard tops.

B

300

All these may help with a deck lid that is hard to close EXCEPT:  

  • A. Adjusting the striker plate.  

  • B. Raising the latch assembly.  

  • C. Lubricating the latch.  

  • D. Tighten the mounting bolts

D

300

An attachment screw is typically hidden by a decorative trim cover behind the interior door release handle. 

  • A. True  

  • B. False 

A

400

What is the purpose of a seat belt pre-tensioner? 

  • A.   Determines whether restraint systems need to be deployed 

  • B.   Helps secure vehicle occupants in the proper position by removing slack in the seat belt 

  • C.   Determines if a seat belt is in use, occupant position, distance from airbags, and weight 

  • D.   Protects the occupant’s head and torso during side-impact collisions 

B

400

When jump-starting a 12-volt battery with a battery booster, where should you attach the black, negative cable?  

  • A. To the negative battery terminal  

  • B. To the positive battery terminal  

  • C. To an engine ground location  

  • D. To the handle of the booster box 

C

400

All of these are common options on a door mirror EXCEPT: 

  • A.   A satellite antenna. 

  • B.   A puddle lamp.  

  • C.   A blind spot indicator lamp. 

  • D.   A turn signal. 

A

400

Ratchets and sockets are used in door removal and installation.  

  • A.  True  

  • B.  False

A

400

When installing a blind rivet, the hole must be slightly larger than the rivet body. 

  • A. True  

  • B. False 

A

500

Which ADAS part is used to recognize traffic signs, road markings, pedestrians, and other vehicles? 

  • A. Forward-facing camera 

  • B. Radar sensor 

  • C. Ultrasonic sensor 

  • D.360view cameras 

A

500

All the following are characteristics of rigid foam EXCEPT: 

  •  A. It has a closed cell structure. 

  •  B. Rigid foam returns to its original shape when compressed. 

  • C. It can expand up to 10 times its non-expanded volume.  

  • D. Rigid foam is also called semi-rigid or pillar foam. 

B

500

On smaller vehicles, a technician should be able to remove the hood without assistance.  

  • A. True  

  • B. False 

B

500

The inspection of the hardware and parts should be completed during the installation of the bumper.  

  • A.  True  

  • B.  False 

B

500

What do the letters and numbers on the face of a bolt head represents? 

  • A. Manufacturer and grade or class  

  • B. Thread pitch or threads per inch  

  • C. Length and width  

  • D. Date manufactured

A