Trackside
Measurements
Acronym
Tools
Miscellaneous
100

Used to test the gap from the point to the stock rail.

What is Obstruction Gauge.

100

The safe number of feet you should remain from the OCS when not trained to perform work on the system.

What is 10 feet.

100

This is the oscillation rate of an alternating electric current or voltage or of a magnetic, electric or electromagnetic field or mechanical system in the frequency range from around 20 kHz to around 300 GHz.

What is RF (Radio Frequency)

100

This is a type of an electrical test equipment which is used to measure insulation resistance.

What is a Megger.

100

This can and should be expected anytime, on any track, from any direction.

What is a train.

200

This is an electrical component made of an iron core coil of low resistance and relatively high reactance, it provides continuity between railroad, track circuits for AC and DC propulsion current. 

What is an Impedance Bond.

200

The minimum amount of time an employee must be clear of approaching rail vehicles.

What is 15 seconds.

200

The acronym used for the trucks driven to perform Signal work.

What is NRV.

200

This is an instrument used for measuring electric potential difference between two points in an electric circuit. It is connected in parallel.

What is a a voltmeter.

200

Where is the closest First Aid Kit to the Signal's Lab at OMF-C?

On the wall in the hallway near the restrooms.

300

 A signal system where coded pulses are received from the rails and used to provide a signal or speed indication in the cab of a train.

What are Cab Signals.

300

________ is used to convert signals from RF to light when fiber fed repeaters are used.

What is OMU.

300

SMSAK

What is Snow Melter System Activated IndiKation; Indication for snow melter system operation.

300

Used to adjust the gold test nuts as well as terminal nuts on various equipment throughout the system.

What is, a terminal wrench.

300

Slang term for throwing a switch, often from normal to reverse.

What is bending a switch.

400

The VLG contains vital inputs that are controlled by a nominal 12 VDC. Inputs can be fed from relay contacts or from the outputs of a microprocessor system. When any input is de-energized (0 volts), the VLG’s outputs de-energize as well. Unused inputs must wired to _________ to keep that input energized. 

What is B12/N12. 

400

How much ice melt should be used to de-ice walkways in adverse weather conditions?

What is, 2-4 ounces of salt per square yard is enough to handle light ice accumulation. For heavier ice, you can increase the amount slightly-this is true for most ice melting products.


(credit:Asphalt Materials website.)

400

EOP

What is, end of platform.

400

The size wrench needed to adjust a switch circuit controller.

What is, 9/16.

400

The time of day considered "Hours of Darkness" 

What is 30 minutes prior to sunset to 30 minutes after sunrise.

500

M-3, M-23, and CSV 24, Model 6, YM2000.

What are, switch machines.

500

How much brown sugar is in the Nestle Tollhouse Chocolate Chip Cookie recipe?

What is, 3/4 cup.

500

PPE

What is, Personal Protective Equipment.

500

Used to view diagnostic information on equipment located in the signal house. 

What is, LCP.

500

How many Mileposts are there between the Southernmost switch point of the Lynnwood City Center Interlocking to the Northernmost switch point of the Lynnwood 62nd Interlocking?

What is, 18.