Balanced Cables
Un-Balanced/ Digital Cables
Grounding/ Shielding
Voltage Levels
Studio/Live Sound Applications
100

Using balanced cables helps eliminate what?

noise/hum/hiss

100

The most common instrument/guitar cable.

TS

100

hum/buzz caused by multiple ground paths is called what

Ground Loop

100

Your standard signal level

Line Level

100

Cable that is used for microphones, preamps/interfaces, monitor connections, patching balanced gear.

XLR

200

A balanced cable better known as your "standard mic cable"

XLR

200

Carries mono signals, so stereo requires two of these ends. Used in mostly consumer gear but some pro audio gear.

RCA

200

A woven mesh of copper strands around the conductors is what type of cable shielding?

Braided Shield

200

Line level reference point for 0dBu is equal to how many volts

.775V

200

Cable that is used for DJ gear (turntables, mixers), older consumer-level audio interfaces, some CD players. 

RCA

300

A balanced cable used in line-level connections

TRS

300

Looks the same as our common guitar cable, but thicker, and has two equally sized insulated conductors

Speaker Cable TS

300

A type of shielding that is fragile and breaks easily if flexed a lot.

Foil Shielding 

300

Signal level produced by electric guitars, basses, keyboards, and synths

Instrument Level

300

Cable that is used for Keyboards, synths, drum machines, DAW controllers, automation data. 

MIDI (5-pin/USB)

400

Can carry 8 balanced audio signals

DB25

400

Sends performance data, not audio

MIDI

400

What button on a D.I. box helps with ground loops?

Pin-1 ground LIFT

400

The absolute weakest signal level

Phono Level

400

Cable that is used for Digital stage snakes, FOH-to-stage communication, routers, control of powered speakers. 

Cat6

500

Uses what so any interference picked up is canceled out when the two signal wires are recombined

Common Mode Rejection

500

Sends digital audio via light.

Optical

500

Why do we want to separate power cables from audio cables in runs (if we are able to)?

Because of the EMI (Electromagnetic Interference)

500

What frequency range is usually cut when connecting a HI-Z device to a regular line level input?

High Frequency Range

500

Cable that is used for Power amps, passive PA speakers, subwoofers, stage monitors (safe for high wattage). 

SpeakON