Aeronautical
Technology
Maritime Technology
History of aviation
Miscellaneous
Physics behind A&M Tech
100

How does a zeppelin stay aloft?

It uses lift bags inflated with helium.

100

A vehicle that is capable of travelling over both land and water surfaces. It operates by creating a cushion of air between the bottom of the craft and the surface

hovercraft 

100

The man who is credited with designing early ancestors of the airplane based on the flight of birds.

Leonardo da Vinci

100

a device that is used to measure or maintain orientation and angular velocity

gyroscope

100

A key factor responsible for generating lift on an airplane wing

airfoil shape, particularly the design known as the Bernoulli principle

200

What is the average speed of a commercial airliner cruising altitude? 

400 mph  

800 mph

1000 mph

800 mph

200

How fast is 1 knot?

1,8 km/h

200

What are the Montgolfier brothers famous for?

The Montgolfier brothers are famous for inventing the hot air balloon.

200

In aviation, what is the altitude known as the "death zone" where the human body is unable to acclimatize to the low oxygen levels?

8,000 meters

9,000 meters 

10,000 meters 

8,000 meters

200

Sideways force generated for horizontal maneuvering of vehicles

lateral thrust - боковая тяга

300

How is tiltrotor different from helicopter?

tilt rotor aircraft have rotors that can tilt to transition between vertical takeoff and landing like a helicopter, and horizontal flight like an airplane. 

Tiltrotor offers advantages in terms of speed, endurance and efficiency 

300

What do ships use to maintain balance and stability?

ballast tanks filled with water and stabilizers - fins or wings that can be extended or retracted

300

When was the first aerial refueling successfully demonstrated?

1923

1934

1951

The Airco DH.4 biplane, in 1923, became the first aircraft to successfully demonstrate aerial refueling using a hose and drogue system.


300

Estimating current position based on previous known position, speed, and direction.

Dead Reckoning

300

The effect that explains how air clings to curved surfaces and causes lift generation on airplane wings.


The Coanda effect

400

What is the purpose of canards on an aircraft?

Canards are small wings positioned at the front of an aircraft, ahead of the main wings, and they provide additional lift and help control the aircraft's pitch.

400

watercraft that use underwater wings to lift the hull out of the water, reducing drag and allowing for faster and smoother travel

hydrofoil -судно на подводных крыльях  

400

Who developed a full sized, power-driven heavier-than-air machine which made its first flight in 1903?

The Wright brothers! They developed the theory that the air pressure exerted on different parts of the plane could be altered by making the wings adjustable which would maintain equilibrium.

400

a theoretical limit of altitude for airplane flight, the boundary between Earth’s atmosphere and outer space

The Kármán line

400

How is lift created?

The air pressure beneath the wing is higher than the air pressure above it, creating lift.

500

What is Mach 5

Speeds that are faster than Mach 5, which is five times the speed of sound, are hypersonic speeds (6,174 km/h)  (1 Mach - 1,225 km/h or 340 m/sec)

500

Which company is pioneering autonomous long-haul shipping?

Hyundai     SpaceX     General Motors      Rolls-Royce

Hyundai


Rolls-Royce - the first autonomous ship (200)

500

Five legendary Russian aircraft designers and engineers.

  1. Sergei Korolev (military aircraft )
  2. Igor Sikorsky (the father of the modern helicopter)
  3. Andrei Tupolev (Tu-144, the first commercial aircraft to exceed Mach 2) 4. Mikhail Ilyushin 5. Alexander Yakovlev (Yak-3, a highly maneuverable fighter used during WWII) 6. Pavel Sukhoi (a variety of military aircraft)
500

two of the most common ways to measure the depth of the sea

Sound waves from ships and radio waves from satellites

500

How does a jet engine work?

A jet engine works by drawing in air, compressing it, mixing it with fuel, igniting the mixture to create high-pressure exhaust gases, and expelling these gases through a nozzle to produce thrust.