Edwin
The vest is powered on and in standby mode
Managed-inactive
How do you turn the vest on and in standby mode
Turn for 1 sec to the blue side
How do you turn your vest off at the end of your shift
Turn to blue side for 6-10 seconds
The vest is powered on, in standby mode and you have created an access path
managed-active
How do you put a drive in Bypass mode
Press and hold the exclamation mark (!) button on the drives UI panel for 15 seconds.
At the start of your shift you should
Drive unit remains in bypass mode unless
When a drive moves at a very slow speed and ignores the effects of the SRBRS stop signal from all SRBRS vests within range.
Bypass mode
The vest is solid green after being activated to the live ar floor
Inservice-Active
Name all components of the SRBRS safety vest
Control assembly, control switch, connectors, radio modules, batteries, indicator medallion, fabric part of vest
How far from the drive do you have to be to activate the drives slow response
How far from the drives do you have to be to active a stop response
Typically 2 metes away but can range from 1 to 8 meters
How do you connect your vest to the floor
Turn to orange side for 1 second
Vest connectors become disconnected, lose wifi signal, or enter AR floor before your SRBRS vest is in the managed-connected state
minor fault
safely exit the facility (:
Both Radio modules fail to connect or stop providing power.
Major fault
After you get off the floor and use the clear faulted vest action
Faulted-inactive
How do you deactivate your vest from the floor
Turn to orange side for 5 seconds / 5 vibrations
What is one floor access etiquette
While on the floor the vest starts blinking green
faulted-active