Burn Notice
The safest type of clothing to wear in the shop?
What is non-synthetic/100% cotton.
Personal Protection equipment is commonly called________.
What is PPE.
The term SMAW.
What is Shielded Metal Arc Welding?
A tool used to drive and remove nails.
What is a claw hammer?
The tool commonly used to check the squareness of a project.
The purpose of a face shield when grinding metal.
What is to protect your face from sparks and debris?
The amount of hearing loss that is preventable with proper hearing protection.
What is 99%.?
Two commonly used gases as a shielding gas in MIG Welding.
What is Carbon Dioxide and Argon?
A stationary saw that is used for cutting different shapes and curves.
What is a band saw?
11/16" is smaller by 1/4".
What is 7/16"?
The check of an OA set up for leaks should take place.
What is before each use?
The correct way to store gas cylinders.
What is upright and secured.
The purpose of flux in welding rods.
To shield the weld from contamination, concentrate the electrical arc/insulate the electrode.
A cut with the grain of lumber.
What is a Rip Cut?
The smallest measurement found of the average tape measure.
1/32"
The fuel source of a Oxy-Acetylene cutting Torch.
What is Acetylene?
The purpose of the flashback arrestor on oxy-fuel torches.
What is to prevent flame from going back into the hose/bottle.
The first two digits of a welding rod like 7018 represent.
Tensile Strength
A tool attachment that is commonly used to drill out holes in wood working.
What is a twist drill bit?
3/4" is 11/16" larger.
What is 1/16"
The maximum working pressure for an Acetylene to be set at safety.
What is 15 PSI.
The code required to be stamped into safety glasses used in an metal fabrication shop.
What is Z87.1
The welding electrode that is known for deep penetration and fast freezing.
What is 6010
The saw designed to make accurate straight-angled cuts.
What is a miter saw?
The amount of material lost during the cutting process.