Hammers
This hammer is commonly used to drive and remove nails.
Claw hammer
This word means twisting or rotational force. POWER
What is torque?
My blade spins in a circle, and I am handheld.
What is a circular saw?
I make boards a more consistent thickness.
PLanar
This senior is going to Iowa next fall
Trenton
This heavy hammer is used for demolition and heavy striking.
What is a sledge hammer?
This tool is generally the better choice for drilling holes.
What is a power drill/drill-driver?
My narrow blade moves up and down, and I'm great for curved cuts.
What is a jigsaw?
I use a high-speed rotating bit to shape wood and create decorative edges.
What is a router?
This senior is not a Fan of Mikayla Mccoy
Mason P
This hammer is commonly used for metalworking.
What is a ball-peen hammer?
This tool uses rotational impacts to help drive difficult fasteners.
What is an impact driver?
My blade moves back and forth, and I'm commonly used for demolition.
What is a reciprocating saw/Sawzall?
You need to cut a curved shape out of plywood. Which tool should you grab?
What is a jigsaw?
This senior is the most nonchalant
Max
For the most effective swing, your hand should normally be positioned here on the hammer handle
What is near the end of the handle?
This small hole is drilled before installing a screw to help prevent wood from splitting.
What is a pilot hole?
My circular blade spins through a table, and the material is normally moved through me.
What is a table saw?
You need to drive several long screws into lumber. Which tool would be a good choice?
What is an impact driver?
This senior really likes planes
Landon Maple
Name TWO things you should inspect on a hammer before using it.
(Accept: cracked/damaged handle, loose head, damaged striking face.)
Give TWO reasons a board might split while installing a screw.
What are placing the screw too close to the edge/end, using too large a screw, or applying too much force/torque?
What does the word reciprocating mean when describing a tool's movement?
What is moving back and forth repeatedly?
You have a rough board that needs to be thinner and have a consistent thickness. Which machine should you use?
What is a planer?
This student has girlfriends that has boyfriends
CJ