Network Media
Copper Cabling
Fiber Optic Cabling
Cable Connectors
Cable Termination
100

What kind of signal is sent over Copper Cabling?

Electrical Signals

100

How do the T568A and T568B wiring standards physically differ from each other?

The green and orange pairs trade positions


100

What jacket color typically identifies a single-mode fiber patch cable?

Yellow

100

What connector is crimped onto the end of an unshielded twisted-pair cable?

RJ-45 (8P8C) connector

100

Straight-through cables connect what kind of devices?

Different kinds, such as host to switch or switch to router.

200

What kind of signal is sent over Fiber-Optic cabling?

Pulses of light

200

What is the maximum data rate supported by an SFP+ transceiver?

10 Gbps

200

Why is the hermaphroditic connector design of TFOCA/MFOCA assemblies is useful in the field?

 Every plug can connect with every other plug, Marines can daisy-chain cable spools to extend reach without adapters


200

What technology in modern Gigabit Ethernet interfaces removes the strict need for crossover cables when connecting similar devices?

Auto-MDIX

200

Cross-over cables connect what kind of devices?

Similar devices, such as host to host or switch to switch

300

What kind of signal is sent over the wireless network?

Radio Signals

300

As an electrical signal moves along a copper cable and gradually loses strength, what is this effect called?

Signal attenuation


300

What technologies does multimode fiber use to generate its light signals?

Light Emitting Diodes or Vertical-Cavity Surface-Emitting Lasers

300

Which fiber-optic connector uses a bayonet-style twist-on/twist-off locking mechanism?

Straight-Tip (ST)

300

How many individual wires are in a CAT5 cable?

8 wires

400

What is the primary purpose of the OSI physical layer?

To transport the bits that make up a data link layer frame across the network media

400

What is the primary way that unshielded twisted-pair cable defends its signals against interference?

The number of twists in the paired wires


400

What is the typical core size of single-mode fiber?

9 microns


400

These connectors are often called square connectors and use a push-pull method to make sure the connector is fully inserted.

Subscriber Connector (SC) Connectors

400

According to the ANSI/TIA-568 standards, what is the maximum frequency supported by Category 6A cabling?

500 MHz

500

What do electrical, light-based, and wireless signals stand for on the media? 

Logical 1s and 0s

500

Why do UTP cable designers use a different number of twists per meter for each wire pair inside the cable?

To improve cancellation of electromagnetic interference between the pairs

500

What does hot-swappable mean in reference to SFP transeivers?

It can be inserted or removed without powering down the device


500

BNC, N-type, and F-type connectors are primarily used  for what kind of cable?

Coaxial cables

500

What is the maximum distance supported by Category 8 cabling?

30 meters