A/M26U-4B
The preoperational checklist is accomplished using this manual.
What is the AG-750AO-MRC-100?
Period of time a stamp may not be reassigned.
What is 90 Days?
The most commonly used metals in SE.
What is Steel and Aluminum?
The primary power source for operating the unit. In terms of input voltage.
What is 440VAC, 100 amps, 3 phase, 60HZ?
This code is entered when repair is authorized, but cannot be performed because of a lack of technical data.
What is BCM6?
This is the purity level of nitrogen gas in the NAN Cart.
What is 99.5%.
This form is used to document SE Misuse and Abuse.
What is the 4790/108?
Most common type of corrosion on aluminum and magnesium alloys, and noticeable as a white or grey powdery deposit.
What is pitting corrosion?
The type of refrigerant used by the C-27.
What is R410A?
This code is entered when the repair is authorized but cannot be performed because of a lack of equipment, tools, or facilities
What is BCM2?
This controls the flow from the manifold assembly to the boost pump preset regulator.
The 3 types of QA inspections.
What are In process, Final, and Screening inspections?
This type of corrosion forms between 2 dissimilar metals.
What is galvanic?
One is 10 Feet and 4 In Diameter the other is 30 Ft and 8 In Diameter.
What are the flexible air duct hoses?
some level of repair beyond check and test is authorized but the maintenance function required to return the item to a ready for issue (RFI) condition is not assigned by SM&R code
What is BCM7
This component seperates cylinders 1 and 2 from cylinders 3-6.
What is the manifold by-pass valve?
(AS) QAR's cannot to be assigned to this area of responsibility.
What are PR's?
These types of corrosion can cause catastrophic failure of metals.
What is stress corrosion and intergranula corrosion?
The 3 modes of operation
What are vent, cool, and dehumidify?
This code is entered when a repairable item is so severely worn or damaged that repair is not feasible.
What is BCM9?
This is the type of nitrogen gass used in the NAN Cart.
What is Type 1 Class 1 Grade B?
This form is used when QA conducts an investigation on a repairing work center.
What is the Y-code process form?
This type of fluid accelerates the deterioration of coatings.
What is Hydraulic Fluid?
The number of refrigeration circuits in the C-27
What is 2?
This code is used when the activity's level of maintenance is limited to check and test.
What is BCM5?